Advertisement
Figure 1
Step 1:
PLACE BASE UNIT ON FLOOR . IF FRONT AND
REAR PANELS HAVE THREADED INSERTS IN THE TOP
THEN THERE IS NO FRONT OR REAR. IF ONE PANEL HAS
PLAIN HOLES IN THE TOP, THEN THAT IS THE FRONT
PANEL.
Figure 2
Step 2:
PLACE LOWER UNIT ON TOP OF BASE UNIT AND
FASTEN THE TWO UNITS TOGETHER WITH NINE
5mm PHILLIPS HEAD SCREWS. FASTEN LOWER
UNIT TO BASE UNIT AT LEFT AND RIGHT SIDE
PANELS AND ALONG REAR PANEL.
For technical support on our products or additional accessories, please call us at 248-624-7710 or visit our web site: www.dedoes.com
International H2O Cabinet Assembly Instructions
Part No: 800565
Figure 3
Step 3:
PLACE THE UPPER UNIT ON TOP OF THE
LOWER UNIT AND FASTEN TOGETHER WITH
FOUR 5mm SCREWS AND NUTS. FASTEN
ONLY AT THE 2 REAR CORNERS AND 2
PLACES ON THE BACK PANEL.
PART # P1178 KD REV#2 - 12/13/2011
Advertisement
