AbleNet QuickTalker 7 Quick Start Manual

Quickstart Guide
QuickTalker 7
™
QuickTalker 12
™
QuickTalker 23
™
Step 2 - Select Level
Select Level
Select LEVEL (1-5) by pressing the red button on the
front of the device.
Level Selection
Key Features
Recording Indicator Light
Speaker
Core Message
Locations
Individual
Message
Locations
Record Button
Step 3 - Recording Messages
a) Entering Record Mode
Press and hold the RECORD button on the back of device
until the red light is on, then release.
Level Indicators
Level Selection
Level Indicators
Volume
Adjust
Buttons
Symbols
Overlay +
Storage
Full Length
Handle
Power On/Off
Battery Compartment
Recording Indicator Light
Record Button
Step 1 - Powering QuickTalker
Powering QuickTalker™
Turn the device to the back side. Insert 4 AA batteries
into the device where shown. Use the On/Off switch to
power the device.
Power On/Off
Battery Compartment
b) Recording Messages
Press and hold the desired message location, begin
speaking after the beep, then release. Repeat for other
locations.
Tip! Speak 6-8" from the microphone for loud, clear sound.
c) Exiting Record Mode
Press and release the RECORD button. Lights turn off.
Note: The device will automatically exit Record Mode
after 20 seconds of no activity.
™