Table of Contents
Advertisement
Installation
Installation steps
• Keep it upright: Do not tilt the fridge more than 45º from upright when moving it.
• Handle with care: Do not apply force to any part such as the condenser or door.
• Spacers: If installing the wine fridge against a wall, we suggest you attach the two
spacers (supplied in the instruction manual bag) to the back of the appliance in
order to prevent it from touching the wall (see the illustration, below).
• Levelling: It is important for the wine fridge to be level in order to work properly. To
level the unit, adjust the levelling legs at the front of the wine fridge.
• Settling:
Before connecting the wine fridge to the power source, let it stand
upright for approximately 2 hours.
have been disturbed during the transportation process to settle and reduce the
possibility of a malfunction in the cooling system from handling during transport.
• Electrical connection: When all installation steps are completed, plug the
wine fridge into a dedicated, properly installed wall outlet. Do not under any
circumstances cut or remove the third (earth) prong from the power cord. Any
questions concerning power and/or earthing should be directed toward a licensed
electrician or our after sales support centre.
(AU) 1300 886 649 (NZ) 0800 836 761 |
This will allow any refrigerant gasses that may
After Sales Support
CKW-293-A
info@tempo.org
7
Hide quick links:
Advertisement
Table of Contents
