Advertisement
Available languages
Available languages
EN
Troubleshooting
Problem
Power LED does not
illuminate after
device has been
switched on.
An audio signal is
emitted from the
parents' station.
No audio signal is
emitted from the
parents' station.
The device automat-
ically switches off.
The signal is weak,
the connection is
interrupted and the
signal is affected.
54 / 60 | © ABUS | Art.-Nr. 73126 | 08.2019 | abus.com
Resolution
Check whether
• all electric cables have been plugged in.
• the batteries are fully charged or chargeable batteries
are in working order and charged (parents' station).
Check whether
• the maximum reception distance has been exceeded.
• the electric cable of the baby unit has been plugged in
correctly.
• the baby unit has been switched on.
• the batteries are fully charged or chargeable batteries
are in working order and charged (parents' station).
• Check the volume setting on the parents' station.
• Remove or charge the batteries (parents' station).
• Ensure that both stations are not located in the
proximity of electrical devices, televisions, mobile
phones and computers.
• Try to place the parents or baby station at different
locations around the room.
• Ensure that both stations are not too far from each other.
Advertisement
