Related Manuals for impact DC-1-USB
Summary of Contents for impact DC-1-USB
- Page 1 Charger Manual Charger Models: DC-1-USB AC-1 AC/DC-3 AC/DC-6-LC AC/DC-6-USB impactcomms.com...
-
Page 2: Table Of Contents
Table of Contents Page Safety Instructions Charger Safety Features Intended Use Chargers DC-1-USB AC-1 AC/DC-3 AC/DC-6-LC AC/DC-6-USB Replacement Parts & Accessories Operating Instructions Technical Information Troubleshooting Tips Important Information Contact Us... -
Page 3: Safety Instructions
Safety Instructions This document contains important safety and operating instructions. Before using the battery charger, please read all the instructions carefully and save them for future reference. User must not make any modification to the unit. Use of accessories not recommended by Impact Radio Accessories may result in risk of fire, electric shock, or injury. Never attempt to charge alkaline or dry cell batteries. They may burst causing damage and personal injury. Never let metal, wire or any foreign material come into contact with any internal part of the charger. To reduce risk of fire, electric shock, or injury, do not operate the charger if it has been broken or damaged in any way. Take it to an authorized Impact dealer. To reduce risk of electric shock, unplug the charger from the AC outlet before attempting any maintenance or cleaning. Turn the radio off when charging the battery. User must not replace the battery cups, power cables, or power supply units with similar parts in the market. Such actions can cause damage to the charger unit or to the rechargeable batteries and will void the warranty. -
Page 4: Charger Safety Features
Charger Safety Features Adapter Cup Safety Features: Every Impact Charger adapter cup has circuitry in the base of the charger cup and is designed to have 2 pre-set voltage limits: a high or maximum level, and a low or minimum level. -
Page 5: Chargers
Universal Radio Chargers All our chargers have these features: Charge battery with or without radio attached Rapid rate, quad-chemistry charging Wide range of adapter cups available LED charging / charged indicator DC - 1 - USB Ideal solution for charging your portable on the go! Perfect for forestry, public WARRANTY safety, and disaster relief. Includes charger cup, cigarette lighter power cable and mounting bracket with radio restraint strap. •... -
Page 6: Ac/Dc-6-Lc
AC / DC - 3 WARRANTY This compact and lightweight charger is exactly half the size of our highly popular flagship six bank charger. • AC and DC cables included • Smallest & Lightest - 2.5lbs • Mounting brackets and vehicle • 110/240V self switching hard wired kits available power supply for international use AC / DC - 6 - LC Charge six different batteries with or without the radio attached! This cost effective WARRANTY charger is made with a super tough Polycarbonate casing. Space saving... -
Page 7: Replacement Parts & Accessories
Replacement Parts & Accessories Please go to www.impactcomms.com to view our complete list of replacement parts and accessories for your charger. Operating Instructions Your Impact charger should come with the adapter cups installed. If the cups are not installed or you are changing the cups, simply insert the cups into each charger bay making sure to line up the four contact points on the bottom of the adapter cup with the four metal contacts on the base of the charger bay. Secure each cup with the Phillips screw provided. IMPORTANT NOTE: DO NOT USE POWER TOOLS. Hand tighten the screw using a Phillips screwdriver to ensure the cup fits firmly into the charger bay. Insert the AC power cable into the power cable port or the DC cigarette cable into the DC port. Plug the AC power cable into the wall socket or the DC power cable into the vehicle cigarette lighter socket. Turn on the charger with the ON/OFF power switch. Upon powering up the chargers, the charger unit will perform a self-diagnosis indicated by all red LED lights on the charger unit, flashing at once and then going off. -
Page 8: Technical Information
Technical Information Charger Voltage Ranges: Lithium battery charging = 7.2V – 8.4V NiCd and NiMh battery charging = 7.2V – 9.6V Power-On Self Diagnostic Feature: When the charger is plugged in and powered on, it will automatically check the power circuit in each charger bay, indicated by the red LED going on, then off within 1-3 seconds. -
Page 9: Troubleshooting Tips
If the same bay LED is still not illuminating, then the processor for that bay may be faulty. If the faulty bay has moved to the bay that was previously working, the cup is possibly defective. Contact your authorized Impact dealer for assistance. “My Motorola CP 150/200 battery does not fit in the MOT-11 cup.”... -
Page 10: Important Information
Important Information PLEASE READ CAREFULLY BEFORE USING YOUR AC/DC-3 CHARGER The single metal pin inside the bottom of each charger bay is designed to detect Li-Ion and Li-Po battery chemistries and apply the correct charging algorithm to avoid any overheating issues. It is therefore necessary to ensure that the four sensor pin contact holes are always exposed when charging Li-Ion batteries. -
Page 11: Contact Us
Contact Us Impact Radio Accessories Headquarters 1290 St. Paul Street, Suite 309 Kelowna, British Columbia Canada V1Y 2C9 info@impactcomms.com 1.866.532.9005 250.868.3444 impactcomms.com Distribution Center 301 N Green Meadows Drive, Unit #F Wilmington, NC USA 28405 Department Contacts Returns & Warranty: returns@impactcomms.com Sales Inquiries: info@impactcomms.com Place & Track Orders: orders@impactcomms.com ( 11... - Page 12 12 )