Pro-Ject Audio Systems Phono Box RS2 Instructions For Use
  1. Manuals
  2. Brands
  3. Pro-Ject Audio Systems Manuals
  4. Phono Stages
  5. Phono Box RS2
  6. Instructions for use

Pro-Ject Audio Systems Phono Box RS2 Instructions For Use

Hide thumbs
1
2
3
4
5
Table of Contents

Advertisement

Quick Links

Download this manual
INSTRUCTIONS FOR USE
Pro-Ject Phono Box RS2

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Phono Box RS2 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Pro-Ject Audio Systems Phono Box RS2

Summary of Contents for Pro-Ject Audio Systems Phono Box RS2

  • Page 1 INSTRUCTIONS FOR USE Pro-Ject Phono Box RS2...
  • Page 2 Connect the Output of the phono amplifier to a line input (such as AUX, CD, Tuner, Tape or Video) on your amplifier. RCA and XLR outputs are separated and both play all the time. 2 amplifiers can be connected. © Pro-Ject Audio Systems · Pro-Ject Phono Box RS2 · Revision 2020.05.15...
  • Page 3 If the pushbutton is pressed, LED On lights up and balance between the left and right channel can be set using the potentiometer Balance on the right side. Maximal channel difference is 4dB (from -2 dB to +2 dB). © Pro-Ject Audio Systems · Pro-Ject Phono Box RS2 · Revision 2020.05.15...
  • Page 4 MM cartridges The Phono Box RS2 operates in MM mode when one of the first four MM Gain settings are used. Gain setting in 4 steps 40, 43, 46 and 50 dB Capacitance in 8 steps from 50 to 400 pF Impedance is fixed to 47kOhms in MM mode.
  • Page 5 This guide was produced by: Pro-Ject Audio Systems notice as deemed necessary to uphold the ongoing Copyright © 2020. All rights reserved. process of technical development. © Pro-Ject Audio Systems · Pro-Ject Phono Box RS2 · Revision 2020.05.15...

Table of Contents