N2 Auto Flow instructions Step 3: Connect one end of the installation cable onto the connector coming out of the N2 system, the other end of the extension cable plugs into the control box. Display settings 1. All the functions are set on the control panel. 2.
Page 5
N2 Auto Flow instructions With this document we declare, Totech Europe BV Paxtonstraat 11 8013 RP Zwolle That the Auto Purge System is in conformation with the following EG standards: EN55011: 1998+A1:1999+A2:2002 EN61000-6-2:2001 2006/95/EG 2004/108/EG Totech Europe B.V. Gerhard Kurpiela, Technical director...
Need help?
Do you have a question about the Totech N2 and is the answer not in the manual?
Questions and answers