Page 1
Quick Guide TCE NEOS Rev. 2.0 07/19 Instructions Manual CAREFULLY READ THE FOLLOWING INSTRUCTIONS BEFORE CONNECTING THE DEVICE TO THE MAINS VOLTAGE AND/OR TO THE BATTERY. ALSO MAKE SURE THAT THE SIZE OF THE DEVICE IS ADEQUATE TO THE BATTERY CONNECTED...
Page 2
The device MUST be used only in networks with ground connection and with fuse or magnetic protection in the plug. IP67. TCE Group Srl declares that the device has a protection degree Before the utilization of the device, perform a quick visual inspection to make sure that there is no visual damage that could compromise the correct functioning of its operations.
Page 3
Good ventilation provides a safe and reliable working environment for charging operations. During the charge, TCE Group Srl advises to keep AT LEAST a 80cm distance between the charger and the battery and to keep well away from any object that could cause or could be the origin of sparks and/or flames.
DEVICE SERIAL CODE LABEL Attached on the side of every device produced by TCE Group Srl there is a label with a unique serial code number belonging to the device and some useful information.
CHARGING CURVE The standard charging curve installed inside the chargers of the NEOS Series is divided in different stages. In every stage, the charging current is subject to variations predetermined by the charging curve installed based on the typo logy of the battery (Lead Acid, AGM, GEL, Lithium, etc etc).
Quick Guide TCE NEOS Rev. 2.0 07/19 Battery Voltage Charging Current Final charging voltages Battery Type Final charging voltage Lead Acid “heavy duty” 2,68 V/Cell Lead Acid “light duty” 2,4 V/Cell 2,35 V /Cell AGM1 2,38 V/Cell AGM2 2,45 V/Cell...
In the event of a warranty claim, the customer will have to dispatch the unit in question to TCE Group Srl, if it is then deemed that the fault/damage was caused by faulty parts installed during the constructions or assembly, TCE Group Srl will provide a replacement of the faulty part/component to restore the optimal state of the device.