Advertisement
RedBack_ EP20-EP40-EP60_. 2016 10:37 10
Symbols used in this manual
CAUTION!
Denotes a potentially dangerous situation. Non-observance of this warning may result in injury or
damage to property.
NOTE
Denotes application tips and important information.
Symbols on the power tool
Disposal information
( See page
7)!
Direct current (DC)
Safety instructions for Li-ion batteries
WARNING!
Read all safety warnings and all instructions. Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injuries. Save all warnings and instructions for future
reference.
Do not open the battery.
There is a risk of a short-circuit.
Protect the battery from heat, e.g. from continuous exposure to sunlight, fire, water, and humidity.
There is a risk of explosion.
In case of damage and improper use of the battery, vapors may be emitted. Ventilate the area and
seek medical help in case of complaints. The vapors can irritate the respiratory system.
Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid
ejected from the battery may cause irritation or burns.
Use only original batteries with the voltage indicated on the rating plate of your electric power tool. If
other batteries are used, e.g. imitations reconditioned batteries or third-party products, there is a risk
of injuries as well as damage caused by exploding batteries.
The battery voltage must match the battery charging voltage of the battery charger. Otherwise, there
is a risk of fire and explosion.
Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type
of battery pack may create a risk of fire when used with another battery pack.
Pointed objects, such as nails or screwdrivers, or external forces may damage the battery. This may
cause an internal short-circuit and the battery to burn, smoke, explode or overheat.
NOTE
The batteries EP20, EP40, EP60 are certified according to IEC62133 (see page11).
Advertisement
