ELAUT BIG ONE XTREME II Operator (User) & Service Manual
  1. Manuals
  2. Brands
  3. ELAUT Manuals
  4. Vending machines
  5. BIG ONE XTREME II
  6. Operator (user) & service manual

ELAUT BIG ONE XTREME II Operator (User) & Service Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

BIG ONE XTREME II
TYPE:
BIG ONE 3
MODEL:
BIG ONE XTREME VERSION II
OPERATOR (USER) & SERVICE MANUAL
ENGLISH VERSION
MAY 2020

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the BIG ONE XTREME II and is the answer not in the manual?

Questions and answers

Summary of Contents for ELAUT BIG ONE XTREME II

  • Page 1 BIG ONE XTREME II TYPE: BIG ONE 3 MODEL: BIG ONE XTREME VERSION II OPERATOR (USER) & SERVICE MANUAL ENGLISH VERSION MAY 2020...
  • Page 2 Elaut NV. Elaut NV accepts no liability for damage and/or problems arising from the use of spare parts not supplied by Elaut NV. This manual has been compiled with all possible care. Elaut NV assumes no responsibility for any errors in this manual and/or the consequences of an erroneous interpretation of the instructions.

  • Page 3: Preface

    EAC technology. This manual is intended for the operator and installer. This manual contains all the information you need to setup and use your Big One Xtreme II amusement machine. Furthermore, the manual contains instructions to prevent any accidents while the machine is running.

  • Page 4: Symbols Used

    Elaut NV. No right of indemnity or reimbursement can be claimed. LIABILITY Elaut NV is not liable for any damages caused by failure to comply with the installation instructions in accordance with the legislation in your country. Big One Xtreme II_1.0_ENG.docx...

  • Page 5: Version History

    VERSION HISTORY During the lifetime of the Big One Xtreme II machine, engineering and/or technical improvements may result in the need to revise this manual. It is then at the discretion of Elaut NV to decide if a revision/new version of this manual is required.

  • Page 6: Manufacturer Details

    T +32 3 780 94 80 T +32 3 778 05 61 info@elaut.be www.elaut.be TRADEMARKS All trademarks stated in this manual are registered trademarks of Elaut NV. TERMS Machine Big One Xtreme II Product Merchandise used in the machine (min. 800 g – max. 4,5 kg)

  • Page 7: Table Of Contents

    Machine menu ........................29 Software updates ......................33 Instructions for cleaning and maintenance ..............33 Overview events ......................34 ERROR Codes – Service Tip ........................ 34 WARNING Codes – Service Tip......................36 Notes ..........................37 Elaut NV Big One Xtreme II_1.0_ENG.docx...

  • Page 8: Introduction

    INTRODUCTION The Big One Xtreme II is an amusement machine which, for instance, can be found in amusement arcades. The player’s objective is to grab a product from the “grab area”. For this purpose, there is a joystick and a fire button at his disposal. The joystick allows the player to move the gantry above the playfield.

  • Page 9: Description

    DESCRIPTION TECHNICAL SPECIFICATIONS Characteristics Big One Xtreme II Mains voltage 100-245V Frequency 47-63Hz Overload protection 10AT Rated current 3.3A@ 230VAC / 6.5A@115VAC Power consumption 540W (typ) / 750W (max) Height 3674 mm Depth 2459 mm Width 3008 mm Weight 950 kg...

  • Page 10: Safety

    PTC features. Their off-state temperature is max. 125°C. • The earth leakage current is less than 1mA. INSTALLATION • Switch off the power supply before commencing installation. • The operator is responsible for a correct and safe installation. Big One Xtreme II_1.0_ENG.docx Elaut NV...

  • Page 11: Unpacking And Installing The Amusement Machine

    UNPACKING AND INSTALLING THE AMUSEMENT MACHINE Gather the equipment to assemble the Big One Xtreme II amusement machine and consult the installation instructions before starting the installation. • Make sure there are no obstacles around the machine and that it is installed on a flat surface.
  • Page 12 (max. 5 learn attempts). Note: If you can’t find the right setting with the automatic claw setup, then you can try the Manual Setup (Automatic claw OFF). Big One Xtreme II_1.0_ENG.docx Elaut NV...
  • Page 13 Pickup time -0,1S < Pickup Time < Pickup time x1,5 Eg. Pickup time is set to 0.4sec. → The pickup time will randomly be picked between 0.3 and 0.6sec with random to ON. Step 4: Test normal games see Claw Settings p. 26 Elaut NV Big One Xtreme II_1.0_ENG.docx...

  • Page 14: Manual Setup (Automatic Claw Off)

    Set manually at minimum the double of the retaining power (use + or -). Randomize pickup time : from pickup power to release power, based on the installed pickup time (Randomize pickup time ON = 1). Big One Xtreme II_1.0_ENG.docx Elaut NV...
  • Page 15 Keep in mind that if you set the pickup time too high, it’s possible that the prize might be held on too long and causes an unwanted win in return! Step 4 : Test see Claw Settings p. 26 Elaut NV Big One Xtreme II_1.0_ENG.docx...

  • Page 16: Working With The Program Unit

     Machine is not connected.  Check the network cables of the program unit and EAC controller.  See manual “Troubleshoot”. Example :  Serial number : this number is programmed by Elaut. Machine Serial number Name Software IP-address ...
  • Page 17 First login : use the master pincode 8888. This screen appears when logged in as master (8888). Edit pincodes : see p. 18 Edit machine info see p. 19 Start configuration : see p. 19 Elaut NV Big One Xtreme II_1.0_ENG.docx...
  • Page 18 First select to add a new pincode. Insert the new pincode e.g. 6666 Select the required actions for the new user. Confirm or cancel Pincode 6666 is added successfully. Select to edit the settings. Big One Xtreme II_1.0_ENG.docx Elaut NV...
  • Page 19 Quick Start Fast and easy basic setup of the machine in automatic mode. See p. 20 Attraction Settings Sounds can be adjusted individually. See p. 21 Advanced Settings All available machine settings. See p. 22 Elaut NV Big One Xtreme II_1.0_ENG.docx...

  • Page 20: Quick Start

    QUICK START Select Quick start to open the menu. Quick start : see p. 20 Attraction settings : see p. 21 Advanced settings : see p. 22 Select to edit the settings. see p. 11 Big One Xtreme II_1.0_ENG.docx Elaut NV...

  • Page 21: Attraction Settings

    Select the part of the machine on which to apply the RGB settings. color(s) for a fixed color or animation. Volumes Volume level of all the sounds during attract mode. Motion detection Defined in seconds. Elaut NV Big One Xtreme II_1.0_ENG.docx...

  • Page 22: Advanced Settings

    Claw Settings: see p. 26 Manual Controls: see p. 28 Game Settings: see p. 29 Manual gantry control: see p. 30 Money Settings: see p. 30 System Settings: see p. 31 Machine: see p. 31 Big One Xtreme II_1.0_ENG.docx Elaut NV...

  • Page 23: Payout Settings

    Only use the Restart Game function when setting up a new prize. If u use the restart game function frequently, the payout will be inconsistent which might result in an over or under payout which is not under control! Elaut NV Big One Xtreme II_1.0_ENG.docx...

  • Page 24: Credit Settings

    CREDIT SETTINGS Select to edit the settings. Big One Xtreme II_1.0_ENG.docx Elaut NV...

  • Page 25: Claw Settings

    (0 = OFF / 1 = ON) out of the claw after the set pickup time. The pickup power is the power with which the claw needs to be able to lift the product from the playfield. Elaut NV Big One Xtreme II_1.0_ENG.docx...

  • Page 26: Manual Controls

    This has no influence on the counters or pay-out regulator as these are games with no win chance. 0 = OFF / 1 = ON This so no money will be accepted but the lighting will keep functioning (e.g. maintenance). Big One Xtreme II_1.0_ENG.docx Elaut NV...

  • Page 27: Game Settings

    The motor speed of the front-back movement of the gantry. The motor speed of the left-right movement of the gantry. The motor speed of the gantry movement when returning to the home position. Elaut NV Big One Xtreme II_1.0_ENG.docx...

  • Page 28: Manual Gantry Control

    Token : channel corresponds to an inserted token (Token-IN Counter) Bill : channel corresponds to an inserted bill (Bill- IN Counter) Coin : channel corresponds to an inserted coin (COIN-IN Counter) Cashless : channel corresponds to a card swipe system Big One Xtreme II_1.0_ENG.docx Elaut NV...

  • Page 29: System Settings

    RGB LED Corners Left: see p. 32 RGB LED Corners Right: see p. 32 RGB LED Front Panel: see p. 32 RGB LED Head: see p. 32 Test Info: see p. 32 Event history: see p. 33 Elaut NV Big One Xtreme II_1.0_ENG.docx...
  • Page 30 SERVICE OPTIONS Select to edit the settings. (0 = OFF / 1 = ON) In this mode the claw can be disconnected and serviced without triggering errors. (0 = OFF / 1 = ON) Big One Xtreme II_1.0_ENG.docx Elaut NV...
  • Page 31 Printed circuit board (PCB) of the joystick, fire button, currency inputs and the motion detector. PCB of the prize box. COUNTER PCB of the mechanical counters. PCB of the X BOYZ PCB of the Y BOGRAB PCB of the claw Elaut NV Big One Xtreme II_1.0_ENG.docx...
  • Page 32 Gio 1 Coin and bill To test coin and bill in Controls To test joystick and fire button in- and outputs Motion detector Gio 2 Prize box To test prize box in BOX & BOYZ Big One Xtreme II_1.0_ENG.docx Elaut NV...

  • Page 33: Software Updates

    Select to edit the settings. Update events : overview is filled in automatically. SOFTWARE UPDATES • Software updates are available at the Elaut Service Department via support@elaut.be or +32 3 780 94 80. INSTRUCTIONS FOR CLEANING AND MAINTENANCE A key-locked door gives access to the maintenance area. Hand this key to your operator and/or maintenance personnel for filling up the machine with prizes or for cleaning purposes.

  • Page 34: Overview Events

    GIO Control Panel no communication 1200 panel PCB. GIO Control Panel firmware Error 1210 Please power off the machine - Contact Elaut NV. 1.5. Prize Box Events GIO Prize Box no communication 1250 No communication with the General IO Prize Box PCB.
  • Page 35 1509 Check if the switches are operating correctly. X Motor firmware Error 1514 Please POWER OFF the machine - Contact Elaut NV. Y motor calibration Error 1600 The calibration of the Y motor could not be completed. Z motor calibration Error 1601 The calibration of the Z motor could not be completed.

  • Page 36: Warning Codes - Service Tip

    If the ‘Automatic claw’ is deactivated, you should raise the pickup (and retaining) power. RGB LED Corners Left no communication Check cables and the RGB PCB RGB LED Corners Right no communication RGB Led Front Panel no communication RGB Led Head no communication Big One Xtreme II_1.0_ENG.docx Elaut NV...

  • Page 37: Notes

    NOTES Elaut NV Big One Xtreme II_1.0_ENG.docx...

This manual is also suitable for:

Big one 3

Table of Contents

Save PDF