Operation - Polar Electro CE202-A Instruction Manual

AU
Reversing the door
Depending on the location of the appliance, it may be necessary to change the direction the door of the
wine cooler opens by changing the side of the door handle.
To reverse the door handle:
1. Ensure the appliance is disconnected from the power supply.
2. Tilt the appliance back slightly and prop it securely. The
appliance must not be tipped back by more than 45
degrees.
3. Unscrew the door hinge screws on the base of the door
and remove the Hinge.
4. Open the door slightly and remove the door in a
downward direction.
5. Remove the screw cover from the top of the wine cooler
with a small screwdriver.
6. Unscrew and remove the hinge from the top of the
appliance.
7. Screw the door frame Hinge to the opposite side of the
appliance and reattach the screw cover.
8. Fit the door into place by locating the upper Hinge first
then closing the door.
9. Reattach the Bottom hinge onto the opposite side of the
door.
10. The appliance can now be lowered into position.

Operation

Controller
The controller for the CE203-A and CE204-A models is located inside the cabinet. These models have an
integrated light that can be switched on using the switch on the controller.
The thermostat is graded from 0 (warm) to 7 (cold).
Controller for CE203-A / CE204-A
4
CE202-A_CE203-A_CE204-A_A5_v6_20200707.indb 4 CE202-A_CE203-A_CE204-A_A5_v6_20200707.indb 4
Telephone Helpline: 1300225960
Controller location
CE204-A: 48 bottles
(6 in base)
Hinge
Screw cover
Bottom Hinge
CE203-A: 28 bottles
(4 in base)
2020/7/7 15:04 2020/7/7 15:04