Digitech Audio Visual AA-2102 User Manual page 3

ADDING A NEW RECEIVER
The AA2102 is designed to work with various receiver. It can be configured to work with more than
16 receivers (within the transmission distance).
How to add a new Receiver
Step1: Power the Transmitter unit, press the power switch.
Step2: Power on the Receiver unit, slide the power switch.
Step3: Press Pairing key on the transmitter for 3 Secs. Transmitter will be under pairing mode, the
LED on the transmitter will be blinking.
Power Switch
Step 4: Press the pairing key on the receiver for 3 Secs, transmitter and receiver are under pairing
mode. The LED on the receiver will be blinking
Power Switch
Step5: When the pairing procedure is ok, LED on the transmitter and receiver will be dimmed at the
same time, Pairing is OK. It will take 10 seconds to do the pairing.
3