Pioneer SUPER TUNER III KEH-9292 Owner's Manual page 8

• Tape Select Switch (KEH-9292, KEH-7272)
This switch is used to switch to the proper mode for the tape being
used and should be depressed when using chrome or metal tapes.
• Dolby NR Switch (KEH-9292, KEH-7272)
Press when playing a tape recorded with Dolby NR.
• Dolby B-C NR Select Switch (KEH-9292)
Setting the Dolby NR switch to ON allows this switch to be used to
switch between Dolby B NR and Dolby C NR (red indicator lights).
Music Search (KEH-9292, KEH-7272)
• Returning to the beginning of selection A
Press the music search button and then the high-speed tape trans
port button for the direction opposite that shown by the direction in
dicator. Playback will automatically start from the beginning of se
lection A.
• Moving from selection A to selection B
Press the music search button and then the high-speed tape trans
port button that corresponds to the direction shown by the direction
indicator. Playback will automatically start from the beginning of se
lection B.
To enable regular fast forward/rewind operations, press the music search button
again to turn the function OFF. The following errors will cause the music search
function to operate improperly, even though the unit is not malfunctioning.
• Unrecorded "blank" portions between selections is less than 4 seconds ^ the
blank portion cannot be detected by the unit.
• Pauses in recorded conversations are longer than 4 seconds the unit reads
these as blanks between selections.
• Portions are recorded at very low volume for more than 4 seconds -» the unit
reads these as blanks between selections.
Current selection
V
Next selection
I A I B H
Blank space
(over 4 seconds)
Rewind Fast forward