flow7 TAB A Series Installation Manual

flow7 TAB A series
Installation Guide
─
─
Safety information
WARNING
Connection of power to the flow7 TAB A series products must only be through an approved
DC power supply, in conjunction with regional safety regulations. The supply output must
be isolated and overload protected, and the output not exceeding 5 Volts.
WARNING
The flow7 TAB A series frame contains NiCuNi coated Neodymium magnets with a pull
strength of 2.1kg each. ​ D O NOT ​ r emove the magnets from the flow7 frame. Please also
observe the following safety information:
● Neodymium magnets can jump together​ , pinch the skin and cause serious
injuries.
● Neodymium magnets will leap and slam together from several inches to
several feet apart​ . If you have a finger in the way, it can get severely pinched or
even broken.
● Keep neodymium magnets away from all children​ . Neodymium magnets are not
toys. Do not allow children to handle or play with them. Small magnets can pose a
serious choking hazard. If multiple magnets are swallowed, they can attach to each
other through intestinal walls causing serious injuries and even death.
● Keep neodymium magnets away from anyone with a pacemaker.​ Neodymium
magnets create strong magnetic fields around them, which can interfere with
pacemakers, ICDs and other implanted medical devices. This is because many of
these devices are made with a feature that deactivates the device in a magnetic
field.
● For more information refer to the safety guide for handling of Neodymium magnets
© 2018 Powered Flowers Ltd. E&OE