Safety Instructions Please read the operating manual carefully before use and keep it properly for future reference. This manual is applicable to the DAC500 series. Please operate according to the instructions of the purchased model. When using electrical appliances, we should have basic safety knowledge to avoid fires, electric shocks and other injuries.You are expected to follow the instructions below.
Page 3
High efficiency Filter cover particulate air filter Molecular filter One power cord Mode of dust Product Dustie Air Cleaner Parallel double-inlet air filtration collection CADR of particular Model DAC500 Plus CADR 505m /h (*1) matters...
Page 4
Operation instructions Plug in the product When plugged in, the air cleaner will give out the “B” sound; the green, orange and red air quality indicator lights are lit and extinguished one by one in order; the gear indicator lights, from AUTO to MAX, are lit and extinguished one by one in order;...
Control panel Power button (indicator light) Timer button Filter replacement indicator light (reset button) Fast cleaning button (Pre Filter /Molecular Filter /HEPA (indicator light) Light control (reset button) Mode / wind speed gear knob Air quality indicator Anion button (indicator light) Timer indicator light Filter monitoring: Pre Filter indicator light/ reset button...
Page 6
Control panel / cleaning maintenance High efficiency filter (HEPA) indicator light / reset button When the air cleaner is used for 6 months, the HEPA replacement indicator light (red) will keep blinking to remind you to replace the HEPA. After the HEPA is replaced, press and hold the indicator light for about 5 seconds.
Cleaning and replacing the filter Stop and unplug Open the filter covers on Remove the Pre Filter and the product. both sides: pull out the the Molecular Filter (as filter covers on both sides well as the plastic bags in in the upper part of the case the air cleaner is a product.
Common problems Common problem Troubleshooting Inspect whether the wire plug has been properly inserted or not. Inspect whether plastic bags of the filter have been removed or not. Inspect whether the filter has been properly assembled Why is there no air coming out of or not.
Need help?
Do you have a question about the DAC500 Plus and is the answer not in the manual?
Questions and answers