Page 1
Three Phase Portable EVSE Charger User’s Manual Thank you for purchasing portable EVSE charger supplied by EVchargers. This manual explains how to use the charger correctly and covers instructions, usage and other information. Please read the manual carefully before using this charger. The instructions in this manual apply for the 11kW and 22kW versions. For more details, please visit: http://www.evchargers.com.au or email info@echargers.com.au PLUG IN AT EVCHARGERS 1800‐PLUGIN evchargers.com.au ...
General Information This product is a well‐designed portable EVSE charger which applies to charge the electric vehicle both at home and on the road. It’s suitable for most standard vehicles. With the optionally available cable bundles, you can connect the charger to Australian 3phase 20A and 32A outlets and single phase 10A and 15A. Specifications: Input: 110V/400V 6A–32 A (3 phase) AC Output: 110V/400V 6A– 32 A (3 phase) AC Charging power range: 3.5 ‐ 22 kW Integrated Residual Current Device (RCD) Operating Temperature: ‐25℃ to +50℃ IP Rating: In cable box: IP 65 A. Red CEE ‐ Wall Side Plug Meets Standards: IEC 62752 ...
Page 3
Functions 1. Leakage Protection: Type A RCD (AC/DC Protection) 2. Over‐current Protection 3. Over‐voltage Protection 4. Under‐voltage Protection 5. Lighting Protection 6. Waterproof IP65 7. Switch the Charging Current by pressing the button 8. Set the charging time by pressing the button 9. Automatically recognize 1 or 3 phase and display on the OLED screen 10. Memorize the current setting of last time 11. Universal Wall‐Mount & Portable EV Charger A. OLED display B. Set charging current C. Schedule charging time D. Wall mount base E. LED Shows different working status PLUG IN AT EVCHARGERS 1800‐PLUGIN evchargers.com.au ...
Page 4
Instructions for Use: 1. Plug wall side plug into electrical outlet, (or use optional tails if necessary) 4. Confirm if the OLED display the correct parameters 2. Press the button “Amps” to set charging Current 5. Plug into vehicle’s charging port 3. Press the button “Time” to schedule the charging Start Time (max 6 hrs later) 6. Charging status: LED flashing PLUG IN AT EVCHARGERS 1800‐PLUGIN evchargers.com.au ...
Page 5
Definition of each area on the screen: PLUG IN AT EVCHARGERS 1800‐PLUGIN evchargers.com.au ...
Connected with EV and waiting Waiting Not available Not available Blue light slowly flashing for the scheduled time Charging Connected with EV and charging Not available Not available Blue light running PLUG IN AT EVCHARGERS 1800‐PLUGIN evchargers.com.au ...
Page 7
Static bright Red light fast flashing Err052 CP Signal Faulty The temperature of PCB above 85℃ Flashing Red light fast flashing Waiting The temperature of PCB above 75℃ Flashing Normal Normal PLUG IN AT EVCHARGERS 1800‐PLUGIN evchargers.com.au ...
Page 8
Non-Automatic Recovery Faulty Status Chart LED Light Circle Full Screen Status Red light fast flashing Power Leak. Power leakage Red light fast flashing Over Current. Over-current PLUG IN AT EVCHARGERS 1800‐PLUGIN evchargers.com.au ...
Warning: 1. Make sure the ground wire is available in your wall outlet 2. Do not use if the EVSE, plug, or cable is damaged 3. Used only for charging compatible electric vehicles 4. Monitor EVSE until the OLED display status is ‘Charging’ After-sales Service EVchargers provides technical support and one year warranty. Any problem or feedback please feel free to contact us at any time: info@evchargers.com.au PLUG IN AT EVCHARGERS 1800‐PLUGIN evchargers.com.au ...