Related Manuals for ChairSpeaker CS2.0
Summary of Contents for ChairSpeaker CS2.0
- Page 1 CHAIRSPEAKER INSTRUCTIONS Model CS2.0 Setup Guide for Your ChairSpeaker Connecting, Troubleshooting and Safety...
- Page 2 This manual will help you learn to use and gain maximum benefit of the ChairSpeaker System. If you should encounter some unresolvable issue, or have any questions, suggestions, or concerns, please contact ChairSpeaker’s customer service...
-
Page 3: Product Assurance
This 5-year limited warranty covers product failures due to manufacturer’s defects for a period of 5 year after the original purchase. The warranty is only valid if the product is purchased from ChairSpeaker.com or one of ChairSpeaker authorized resellers. If the product fails within 5-years of the ®... -
Page 4: Safety Notices
Clean with dry cloth only. Do not subject this product to excessive heat conditions such as radiators, heat vents, stoves, amplifiers or any item that pouches heat. Do not adapt or modify any part of the ChairSpeaker system. ® Power cable should be routed clear of foot traffic and supported clear of kinking and abrasion. - Page 5 To reduce the risk of fire or electric shock, do not expose any part of the ChairSpeaker system to rain or moisture. ® The ChairSpeaker system should not be exposed to dripping or splashing ® liquids. Do not place objects filled with liquid such as vases on or near any part of the ChairSpeaker system.
- Page 6 Magnetic Warning Do not place speakers near chest or in the vicinity of a pacemaker or defibrillator. If you have a concern, please contact your physician. As with all speakers, the ChairSpeaker have a magnetic field. Page 5 of 20...
- Page 7 IN THE BOX When you open the box the small box on the left labeled “Cables” will have 2 connection cables. One Optical Cable One RCA to 3.5mm Page 6 of 20...
- Page 8 After you remove the next level of cardboard you will see 2 boxes with power adapters. One is for the speakers the other is for the transmitter. Page 7 of 20...
- Page 9 Transmitter 1) Power Indicator 2) Voice Enhancement Selector 3) Optical Input 4) 3.5mm Input 5) RCA Input 6) 12v Power Input 7) IR Output Panel Page 8 of 20...
-
Page 10: Power The Transmitter
Power the Transmitter Plug the power supply into 12v Power Input (6) on the back of the IR Transmitter. Then plug the power supply into a surge protector or standard electrical outlet. The power indicator (1) light will come on if you have power. DO NOT modify the power supply if the provided plug does not fit your outlet. - Page 11 RCA analog and 3.5mm analog audio. We do have kits for installing other ways as well, if you need to order one of our specialty kits please call us 1-888-277-7941 or visit chairspeaker.com Each one of the connection methods may be located on different devices such as the tv, cable box, satellite box or DVD player.
- Page 12 Connecting Signal Digital We need get a sound out but to the transmitter to broadcast the sound, you will need a connection like the highlighted ones below. This must indicate that it is an “out”, if this port is labeled “IN” or “INPUT” port it will not work. If you don’t have a connection labeled out on the back of your TV you may use a headphone output.
- Page 13 At the back of your TV, find the DIGITAL AUDIO OUT (OPTICAL) port. If audio out ports are not available on your television, use the audio ports on your cable or satellite box. Plug the provided optical cable (cable ends shown below) into the transmitter’s optical input (3) and the other into your television, cable box or satellite box.
- Page 14 This signal can be sent in many formats to the transmitter. The ChairSpeaker Transmitter only decode PCM sound. You may need to change the settings on the device to output PCM. This can be found in your TV user manual.
- Page 15 ® ends about 18” apart. Make sure the side with the power inlet is in your right hand. Standing up facing your chair lay the ChairSpeaker over the back of your chair and press ® the links hard against the chair to conform to the shape of your chair. Make sure some links go over the back.
- Page 16 Next plug the speaker into the wall. Turn on the speaker using the volume knob located on the front of the left speaker as a user is sitting in the chair. A small light by the power input on the top of the left speaker will indicate the unit is on, this will only come on if the volume is turned on.
- Page 17 . Do not cover the lights on the front of the ® transmitter. ChairSpeaker has a shelf that can be purchased to place on the TV (see ® below). To purchase this shelf, go to ChairSpeaker.com or call 1-888-277- 7941. Page 16 of 20...
-
Page 18: Voice Enhancement
After you have pointed the transmitter and confirmed power lights are illumined on both the transmitter and speakers, turn on your TV and cable/satellite box. Then check the volume of your TV. You should have sound if not, adjust the volume knob on the speaker. If you have additional problems, you can visit our website or call us at 1-888-277- 7941. - Page 19 Adjusting The Sound Zone Speaker angle adjustment. The angle of the speakers can be adjusted to close off the sound zone or open the sound zone. This is done by turning the ball of the speaker. Turn the speaker in towards the chair to close of the sound from the room more.
- Page 20 If you have any issues or need help please call us M-F, 9-5 EST for help. 1-888-277-7941 We have other installation products and frequently asked questions (FAQ’s) at chairspeaker.com Page 19 of 20...