DiaMedical SimLabSolutions Sapphire Series Installation Instructions

DiaMedical SimLabSolutions Sapphire Series Installation Instructions

Horizontal console with lights

Advertisement

Installation Instructions
Sapphire Series
Horizontal Console
with Lights
Note
Console installation should conform to local building codes
The installation instructions provided are for the Amico standard products. Slight modifications to the
installations may be required. The product shipped to the job site may not be exactly as shown on the
Caution
Please do not lift console by the plastic end caps
1. Review a copy of the final approved shop drawing(s) and/or submittal package. These documents will
provide you with technical information specific to your installation, such as:
• equipment types & quantities
• room numbers and location
• shop drawings of each unit type
• wiring diagrams and rough-in locations
2. Locate the console unit from the shipping boxes that you wish to install. The contents of each shipping box
are listed on the shipping document(s).
DiaMedical USA | 7013 Orchard Lake Rd, Suite #110 West Bloomfield, MI 48322
DiaMedical USA | 7013 Orchard Lake Rd, Suite #110 West Bloomfield, MI 48322
P: (877) 593-6011 | F: (248) 671-1550 | | www.DiaMedicalUSA.com
P: (877) 593-6011 | F: (248) 671-1550
installation drawings.
www.DiaMedicalUSA.com
simlabsolutions
a division of DiaMedical USA
.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SimLabSolutions Sapphire Series and is the answer not in the manual?

Questions and answers

Summary of Contents for DiaMedical SimLabSolutions Sapphire Series

  • Page 1 2. Locate the console unit from the shipping boxes that you wish to install. The contents of each shipping box are listed on the shipping document(s). DiaMedical USA | 7013 Orchard Lake Rd, Suite #110 West Bloomfield, MI 48322 DiaMedical USA | 7013 Orchard Lake Rd, Suite #110 West Bloomfield, MI 48322 P: (877) 593-6011 | F: (248) 671-1550 P: (877) 593-6011 | F: (248) 671-1550 | | www.DiaMedicalUSA.com...
  • Page 2 3. Using a stud locator, mark the location of any metal studs or blocking in the building wall that intersect the console mounting location. DiaMedical USA | 7013 Orchard Lake Rd, Suite #110 West Bloomfield, MI 48322 DiaMedical USA | 7013 Orchard Lake Rd, Suite #110 West Bloomfield, MI 48322 P: (877) 593-6011 | F: (248) 671-1550 P: (877) 593-6011 | F: (248) 671-1550 | | www.DiaMedicalUSA.com...
  • Page 3 6. Hang the console unit on the wall, over the mounting bracket, and center the unit with reference to bed center line. Verify rough-in locations in wall and align with rough-in provisions on console. DiaMedical USA | 7013 Orchard Lake Rd, Suite #110 West Bloomfield, MI 48322 DiaMedical USA | 7013 Orchard Lake Rd, Suite #110 West Bloomfield, MI 48322 P: (877) 593-6011 | F: (248) 671-1550 P: (877) 593-6011 | F: (248) 671-1550 | | www.DiaMedicalUSA.com...
  • Page 4 (2 screws typ. for top and bottom) 12. Replace lens covers in place using provided screws DiaMedical USA | 7013 Orchard Lake Rd, Suite #110 West Bloomfield, MI 48322 DiaMedical USA | 7013 Orchard Lake Rd, Suite #110 West Bloomfield, MI 48322 P: (877) 593-6011 | F: (248) 671-1550 P: (877) 593-6011 | F: (248) 671-1550 | | www.DiaMedicalUSA.com...

Table of Contents