Advertisement
Table of Contents
- 1 STEP-I: Unpack and Inspect
- 2 STEP-II: Fit Components into Right End Frame
- 3 STEP-III: Fit Left End Frame
- 4 STEP-IV: Secure Knock down Bolts
- 5 STEP-V: Hammer Dowels into End Frames
- 6 STEP-VI: Drive Brass Pins
- 7 STEP-VII: Secure Screws in Seat and Back
- 8 STEP-VIII: Hammer Plugs into Back Stretcher
- Download this manual
Advertisement
Table of Contents
Summary of Contents for AuthenTeak Kingsley-Bate NT18
- Page 1 Kingsley-Bate NT18 Nantucket Bar Chair Assembly Instructions...
- Page 2 KINGSLEY–BATE Fine Garden Furniture ASSEMBLY INSTRUCTIONS FOR THE NT-18 BACK SEAT STEP-I Unpack, inspect and lay the p arts on a clean, flat, soft surface to avoid marring the wood. NOTE: During assem bly of the furniture please match joints with the corresponding letters or numbers.
- Page 3 STEP-V Carefully hammer dowels in to LEFT and RIGHT END FRAMES. Use the sanding bl ock between the hammer and dowels to prevent marring of the wood. BACK can be pushed slightly forward for better clearance when swinging hammer. *NOTE: 1” DOWEL USED FOR PLUGGING END FRAMES. STEP-VI Carefully drive the brass pins into the LEFT and...
Need help?
Do you have a question about the Kingsley-Bate NT18 and is the answer not in the manual?
Questions and answers