AWG I Operating manual I Fittings I
Use of different foam agents
Foam agents from different manufacturers and different
products or types must not be mixed. Applied extinguishing
foams are compatible without any problems.
5.2
Handling
1
Foam tube
2
Grip
3
Hand lever (option)
Fig. 2
Handling
Required flow pressure
The foam nozzle is designed for a flow pressure of 3 to
10 bar on the inlet side. Within this range, optimum foaming
is achieved.
The water hose for connection to the fixed coupling of the foam
nozzle is ready at hand.
The hand lever is closed (Fig. 2/B).
M1106B10 I Rev. 02-03/20
Low expansion foam nozzles S2, S4, S8
4
5
ENGLISH
Fixed coupling
Water hose adapter
USE
31 / 40