Page 2
● S1 Button: Luminous dial, Bluetooth on / off ● S2 Button: Mode, Confirm, Save ● S3 Button: Numerical control, Camera shutter, Timer start / pause ● S4 Button: Settings, Switch, Reset Button operation guide: : ● Press the button once ●...
Page 3
Main functions 1. Full time display: shows week and time, to view date, press the S3 button. The watch will automatically sync date and time, after Bluetooth connection. 2. Alarm and stopwatch: You can set one alarm via watch, and three alarms via phone app.
Page 4
Display icons: Bluetooth on / off Low power Alarm Steps Calories Distance Date Steps count Calories burnt Walking distance Alarm settings Stopwatch Remote camera shutter Incoming call reminder Message reminder...
Page 5
Power on / off When the watch is switched off, long press S2 and S3 buttons until "ON" shows in the center of the dial, then the watch will be switched on. On any mode (or dial interface), long press S2 and S3 buttons (for about 3 seconds) until “OFF”...
Page 6
● Press S4 button to select the hour, minute, on/off ● Press the S3 button to adjust the value ● Press the S2 button to confirm the settings. Stopwatch / Timer Stopwatch setting: ● Press the S2 button 6 times to enter the stopwatch mode ●...
Page 7
APP installation for Android If you use an Android phone, the operating system needs to be Android 4.3, BT version needs to be 4.0 or above. To download the app, scan the following QR code or search “Sports+” app on the GooglePlay store.
Page 8
Data upload and refresh When the APP is connected to the watch, the sport data will be automatically uploaded to the cloud server. To refresh data on the app, swipe down from the top of the screen - you will get the latest data. Note: please make sure to set date and time correctly otherwise the statistics may be inaccurate due to date &...
Need help?
Do you have a question about the VIBE 3 and is the answer not in the manual?
Questions and answers