Advertisement
Advertisement
Table of Contents
Summary of Contents for AEC BT501
- Page 1 User manual for AEC BT501 Bluetooth Speaker with LED Alarm Clock...
- Page 2 Specifications Model: BT501 Bluetooth version: v5.0 Supported BT profiles: A2DP, AVRCP, HFP, HSP Bluetooth range: up to 10m Frequency range: 175Hz - 20KHz Speaker power: 5W Impedance: 4 Ohms Audio inputs: 3,5mm, TF card Battery capacity: 2000mAh Charging connector: microUSB...
- Page 3 2) Time and Alarm clock settings buttons Short-press to cycle clock brightness (strong brightness (set by default)/normal brightness/weak brightness; Long-press to turn On/Off the LED clock display Short-press to change clock modes (alarm clock 1 or 2 / alarm clock 1 and 2 / no alarm clock Time setting (long-press to decrease hours, short-press to decrease minutes) Time setting (long-press to increase hours, short-press to increase...
- Page 4 If the device is disconnected for 5 minutes it will turn off the Bluetooth automatically. Short-press the button to switch to Bluetooth mode or long-press to enter the pairing mode. When in pairing mode, scan for “BT501” on your device and pair it. When you get an incoming call press the button to answer the call and press it again afterward to end the call.
- Page 5 To set the time long-press the button, then the hours via +/- buttons. When done, press the SET button again and set the minutes the same way. Long-press the SET button to set the time. For setting the alarm short-press the button and the Alarm 1 will light up.
Need help?
Do you have a question about the BT501 and is the answer not in the manual?
Questions and answers
How to switch to 12 hour format?
Can you change from 24hr clock to 12hr clock?
Can the TF card file be the alarm music