Download Print this page

Saia Burgess Controls PCD7.L65T-RC5 Series Pairing Instructions

Advertisement

Quick Links

Saia-Burgess Controls AG
Bahnhofstrasse 18, 3280 Murten, Switzerland
Tel +41 26 580 30 00, Fax +41 26 580 34 99
www.saia-pcd.com
PAIRING INSTRUCTIONS
To pair your remote control with a radio-frequency device, point it to the device from a distance of 1 to 2 metres.
!
Please remember, only one remote control can be paired at a time.
Pairing with a device built into the ceiling
In an upright position, if paired with a device built into the ceiling
RC5x in an upright position
MC
Screen
RC5x
Floor
Pairing with a device built into a suspended metallic ceiling
MC
Screen
RC5x
Floor
PP26-058_ENG01
Ceiling
Height
1.20 m to 1.50 m
Distance:
1 to 2 metres
Metallic ceiling
The distance
between the remote
control unit and the
device is less than
Remote control PCD7.L65T-RC5x
(PCD7.L66D-MC72V)
!
Where the suspended ceiling is made of metal, the
pairing distance is shorter, less than 30 cm.
If a suspended ceiling is added after the pairing has
been completed, the connection between the remote
and the multi-sensor might be lost.
Once pairing is complete, the connection will be
maintained at distances of up to 7 m or more in the
presence of suspended metallic ceilings.
2018-04-25

Advertisement

loading

Summary of Contents for Saia Burgess Controls PCD7.L65T-RC5 Series

  • Page 1 Saia-Burgess Controls AG Bahnhofstrasse 18, 3280 Murten, Switzerland Tel +41 26 580 30 00, Fax +41 26 580 34 99 www.saia-pcd.com Remote control PCD7.L65T-RC5x PAIRING INSTRUCTIONS To pair your remote control with a radio-frequency device, point it to the device from a distance of 1 to 2 metres. Please remember, only one remote control can be paired at a time.
  • Page 2 Saia-Burgess Controls AG Bahnhofstrasse 18, 3280 Murten, Switzerland Tel +41 26 580 30 00, Fax +41 26 580 34 99 www.saia-pcd.com Remote control PCD7.L65T-RC5x 1. Pairing Menu  Connect the radio-frequency device to your regulator’s DALI network  Turn on the remote control unit by pressing the “occupation” button ...