Atomic Kira K15 Instruction Manual

Hide thumbs

Table of Contents

Quick Links

Download this manual

Kira K15 Active

Subwoofer

Kira K15 Instruction Manual

CAUTION - ATTENTION - VORSICHT

RISK OF ELECTRIC SHOCK- DO NOT OPEN

RISQUE D'ELECTROCUTION - NE PAS OUVRIR

STROMSCHLAGGEFAHR - NICHT OFFNEN

In Compliance with the following directives: RoHS Directive (2002/95/EU) and

WEEE directive (2002/96/EU)

If this product is no longer functional or reached the end of its usable life, please

take it to an approved recycling plant.

Table of Contents

Need help?

Do you have a question about the Kira K15 and is the answer not in the manual?

Questions and answers

Summary of Contents for Atomic Kira K15

Page 1 Kira K15 Active Subwoofer Kira K15 Instruction Manual CAUTION - ATTENTION - VORSICHT RISK OF ELECTRIC SHOCK- DO NOT OPEN RISQUE D’ELECTROCUTION - NE PAS OUVRIR STROMSCHLAGGEFAHR - NICHT OFFNEN In Compliance with the following directives: RoHS Directive (2002/95/EU) and...
Page 2 For your safety and to ensure you make full use of all the features, please make sure you read this manual in full. Product Description: A very powerful active subwoofer delivering a massive 1500 watts of RMS power. The Kira K15 has a bespoke 15” driver and inbuilt 1500-watt Class D amplifier. The internal electronic crossover and a phase reverse switch, make this a completely selfcontained subwoofer cabinet.
Page 3 Before beginning your initial setup check the unit has not been damaged in transit. In the event there is damage to the housing, cable or internal components contact your dealer immediately. • Kira K15 Active Subwoofer • User Manual • Power Lead...
Page 4 ❼ ❻ ❺ ❽ ❹ ❸ ❷ ❶ ❾ ❿ ⓫ Functions Back Panel 1 Power LED: This lights when there is power to the cabinet and the speaker is turned on. 2 Signal LED: This lights when a signal is detected into inputs 1 and 2. 3 Limiter LED: This lights up if distortion is detected.
Page 5 Input Connections Always use a good quality screened cable. Make sure soldering has been done correctly, bad solder joints can cause damage or intermittent faults to occur. Try to always use a balanced connection, if this is not possible try to keep unbalanced cables as short as possible. See the connector wiring chart below when wiring connectors.
Page 6 Wiring Example Use this arrangement for front of house in halls and event areas. The setup shows the Kira K15 used with the XL12 speaker, although the K15 will work well with many other types of professional full range active cabinets.