Dirt Devil PD11030 Manual page 10

WARNING
To reduce the risk of personal injury - Unplug before
cleaning or servicing.
STEAM CLEAN FLOORS
1. Vacuum floors before
steam cleaning.
3. Steam will start to flow
from the base and wet
the cleaning pad.
10
IMPORTANT
Never use the Spray+Steam without a cleaning pad properly
attached to the mop head.
IMPORTANT
Check the steam water tank to ensure there is adequate
water in the tank.
2. Plug in then press the power
switch on your Steam+Clean.
The steam light will turn
green when it's ready.
4. Tilt the handle back to clean
the floor area.
POWER