Advertisement
To avoid unwanted rotation, use in
pairs at ends of material.
When using multiple MagJigs always align the ON/OFF in the same
MagJig usage is limited only by your imagination!
Holding a cove molding jig in place
Create your own Featherboard
Hold a repetitive stop in place
Hold down thin stock
Build a shop sweeper
Create a fence for your power tools
Magswitch products are covered by a One Year Limited Warranty on Material and Workmanship. Warranty is Non-Transferable.
Magswitch reserves the right to inspect all product claims under warranty. Any alteration of the device voids this warranty.
User assumes all risk for the proper use of this device and for ensuring product suitability for intended application.
This warranty shall not cover any incidental or consequential damages due to the improper use or failure of this device.
All Magswitch products are covered under International and U.S. Patents 6,707,360 & 7,012,495. Add'l patents pending.
Part Number 110177
Revision Date, August 1, 2008
direction for maximum magnetic holding power as shown.
Magswitch Limited Warranty
Pull Sideways=Less
Table Surface
Hold a bench top tool in place on your table
saw
If you have a great idea for a MagJig use,
please contact us at www.magswitch.com.au
If securing the MagJig use these
holes with #6 or #8 screws,
8-32 or M4 machine screws
Pry Force and
twisting
force=Least
Strength
Advertisement
