Controls; Display Symbols - VOLTCRAFT CM-100 Operating Instructions Manual

Controls

(see fold-out page)
1 "SET" and "Next/forward" button
2 Button without function (opposite as well)
3 "POWER" button to turn the device on/off
4 "HOLD" and "ESC" button
5 LCD display
6 Measuring connection for external sensor (15)
7 Taste "ENTER" and "REC" button
8 "ALARM" button and "Back/down" button
9 Power pack connection socket
10 RESET button
11 RS232 interface
12 Mounting bracket
13 Battery compartment
14 Tripod socket
15 Sensor connection plug
16 Sensor

Display symbols

CO chemical symbol for carbon dioxide
2
PPM Unit "parts per million"
°C/°F Temperature unit (°Celsius or °Fahrenheit)
WARM UP Displays the warmup phase
REC Displays recording for minimum/maximum values
MAX Displays the maximum value
MIN Displays the minimum value
ALARM Displays alarm mode is active
Battery replacement symbol
Symbol for currently measuring
DATA Interface is active, data transfer in progress.
20