Table of Contents
Advertisement
DI-500/510 Series and DI-750/760 Series Hardware Manual
The DI-500 Series Instrument
The following describes the user accessible items on the DI-500/510 or DI-750/760 Series instrument.
ANALOG INPUTS
The analog inputs allow you to connect your input signals to the instrument. All portable instruments in the series
allow dual-access connections (either to the sheathed banana jacks or to the screw terminals). All desktop and rack-
mounted instruments support only screw terminal signal connections. Refer to the section titled "Connecting Your
Signals" on page 6 for more analog input details.
SIGNAL CONDITIONING MODULE INTERFACE
Allows you to plug DI-5B signal conditioning modules into a channel on the instrument. Each DI-5B module filters,
isolates, amplifies, converts, or otherwise conditions your input signal (i.e., the output from a thermocouple, strain
gage, LVDT, etc.) so it becomes suitable for A/D conversion by the DI-500/510 or DI-750/760 Series instrument.
When a DI-5B module is installed, the input signals are conditioned from either the sheathed banana jacks or the
screw terminals.
Note that not all input signals require signal conditioning. On instruments with only high level inputs (such as the DI-
500-32 or DI-750-32 and the DI-510-64 or DI-760-64), these signal conditioning module interfaces are not needed
and therefore are covered.
Getting Started
12
Free Datasheet http://www.datasheet4u.com/
Advertisement
Table of Contents
