Spirit SP-TL24 Series User Manual

Spirit SP-TL24 Series User Manual

Desktop label printer

Advertisement

®
SPRT
SP-TL24/TL25 Desktop Label Printer User's Manual
SP-TL24/TL25 Desktop Label Printer
User's Manual
VER 0.01
Beijing Spirit Technology Development Co.,Ltd
www.sprt-printer.com

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SP-TL24 Series and is the answer not in the manual?

Questions and answers

Summary of Contents for Spirit SP-TL24 Series

  • Page 1 ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual SP-TL24/TL25 Desktop Label Printer User’s Manual VER 0.01 Beijing Spirit Technology Development Co.,Ltd www.sprt-printer.com...
  • Page 2: Table Of Contents

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual CONTENT NOTICE..........................1 Declaration........................2 Chapter 1 Outer Appearance and Model No..............2 1.1 Outer Appearance....................2 1.2 Model Name......................4 Chapter 2 Performance Characteristics................5 2.1 Printing Specification...................... 5 2.2 Paper Roll........................5 2.3 Print Character........................5 2.4 Physical Parameters......................
  • Page 3: Notice

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual NOTICE Please read this manual carefully before using the printer! Notice of Safety Be sure to use the power supply provided by our company. Otherwise it may cause damage to the product. Please do not open the paper case cover when it is printing or just when printing is finished, do not touch the printer head with hand or any part of body to avoid excessive temperatures leading to burns.
  • Page 4: Declaration

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual otherwise the printer may work improperly. Notice of Storing The printer should be stored at a temperature of -20 ° C to 60 ° C and a relative humidity of 10% to 90%. Declaration It is A class product, which may cause radio interference in the living environment.
  • Page 5 ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual SP-TL24 Outer Appearance...
  • Page 6: Model Name

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual SP-TL25 Outer Appearance 1.2 Model Name Model Description Printing Density SP-TL24U 8dots/mm, 384dots/line SP-TL24UBTDM USB, Blue Tooth SP-TL24U5 8dots/mm, 448dots/line SP-TL24UBTDM5 USB, Blue Tooth SP-TL25U 8dots/mm, 384dots/line SP-TL25UBTDM USB, Blue Tooth SP-TL25U5 8dots/mm, 448dots/line SP-TL25UBTDM5 USB, Blue Tooth...
  • Page 7: Chapter 2 Performance Characteristics

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual Chapter 2 Performance Characteristics 2.1 Printing Specification Printing Method: Thermal line Paper Width: 25mm(Min)---60mm(Max) Printing Width: 48mm/56mm(Max) Max Label: 60x65mm Min Label: 25x20mm Label Gap: 2-3mm Resolution: 8dots/mm(203dpi) Printing Speed: Label Paper 100mm/s(Max) Thermal Paper Max 127mm/s 2.2 Paper Roll Paper Thickness:...
  • Page 8: Other Specification

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual Storage Temp: -20℃~60℃ Storage Humidity: 10%~90% 2.6 Other Specification ● Paper Loading Method: please refer to details in 3.1.1 Paper Roll Installation. ● Black Mark Location: available(details please see 4.2 pre-printed black mark manual).
  • Page 9: Basic Functions Instructions

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual 3.2 Basic functions instructions 3.2.1 Turn on Close the paper cover in the power off state, then turn on the power. The power indicator and error indicator flash alternately two times, the power indicator is always on, and the error indicator is off.
  • Page 10 ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual button to stop the paper feeding; Label mode: In the power-on state, put in the thermal label paper, press the 【FEED】 key. The printer forwards the paper to find the label gap, and sends the label gap to the tear line position.
  • Page 11: Interface Connection And Printing

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual indicator flash alternately. Press the 【FEED】 button three times, then close the Paper Cover. The printer will print out the currently set parameters, and at the end prompt: "Note: set the recovery system to the default values, press the 【FEED】 button to confirm.
  • Page 12 ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual power outlet, positive inside and negative outside. Please use the standard power adapter to supply power. 3.3.2 USB interface The standard configuration of the SP-TL24 printer is equipped with a standard USB printer cable D-port data cable for connecting the printer to the main device. The printer's USB belongs to the slave device type (DEVICE);...
  • Page 13: Indicator Light, Buzzer And Button Operation

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual device and a link is established, it will no longer provide search and link services to other primary Bluetooth devices until it is disconnected from the primary device that is linked to it. 3.3.4 Cash interface Signal Direction...
  • Page 14: Chapter 4 Other Information

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual Error indication form: Errors Error indicator Specification status Without paper Constant on Replace the paper or use the appropriate label stock Paper case opens Flash five times, Close the paper case stop 1 second Printer head Flash one time, Wait for a moment to continue...
  • Page 15: Cleaning And Maintenance

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual Printing position: As shown in the above figure, the black mark should be printed on the front left side and the back left side edge of the text side. Width range: width ≥ 7mm Height range: 4mm ≤...
  • Page 16 ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual...
  • Page 17: General Setting

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual Appendix A Setting introduction: Press 【PAUSE】button to choose setting,when press it once , the set become the next one and it will print the present set value; use 【FEED】 button to set the set value, when press it once , the set become the next one .After the setting is completed, press the [FEED] and [PAUSE] button at the same time to save the current setting and enter the normal power-on state, otherwise the setting value will not be saved.
  • Page 18: Print Density

    ® SPRT SP-TL24/TL25 Desktop Label Printer User’s Manual Print density: Print Direction: FEED Positive Reverse FEED Black mark mode: FEED FEED Printer mode Settings: FEED Label Receipt FEED Paper-out reprint: FEED FEED Print speed: FEED FEED FEED 70mm/s 127mm/s 90mm/s 100mm/s FEED Note: There are differences in speed setting items for different models.

Table of Contents