Get the Arlo app Download the free Arlo app to get started. The app guides you through installation.
Page 5
Use the wall mount You can place Arlo Baby on a flat surface or mount it on a wall. Place the wall plate. Secure the wall plate with the included screws. Align the holes on the base of your camera with the wall plate.
Start streaming Your Arlo Baby camera is set up and ready to go. To view useful tutorial videos, find troubleshooting tips, or get support, visit support.arlo.com.
Page 8
Add Arlo Baby to the Apple Home app Locate your HomeKit code. The code is on the back cover of this guide and on the Arlo Baby camera label on the bottom of your camera. You can scan the HomeKit code xxx-xxx-xxx on the back of this guide You can type the HomeKit...
Page 9
Your Apple mobile device’s camera launches and you are prompted to scan or enter the HomeKit code. Scan the HomeKit code using your mobile device’s camera. If you have trouble scanning the code, tap Don’t Have a Code or Can’t Scan? and then type the code. After your camera is added, do the following to complete the setup process: •...
Page 10
Arlo Baby features ¾ Rechargeable battery Your Arlo Baby camera includes a built-in rechargeable battery and can work for several hours at a time without being plugged in. You can place the camera in locations where you cannot connect it to a power outlet. Use the switch on the bottom of the camera to power the Arlo Baby camera’s battery off.
Page 11
¾ Night light Use the app or the top button on the right side of the camera to turn the night light on and off. ¾ Music Use the app or the bottom button on the right side of the camera to play and pause music.
Need help?
Do you have a question about the Baby Series and is the answer not in the manual?
Questions and answers