Opengear CMS7100 Series Quick Start Manual page 8

9. CONFIGURE SERIAL & USB DEVICES
Click Serial & Network > Serial Port. Click Edit to modify a specific port.
You can modify common settings including Baud Rate, Parity, Data Bits,
Stop Bits, and Flow Control as well as port connection settings including
SSH, Telnet, Web Terminal, and RFC2217.
Click Apply to save any modified settings.
NOTE: Your console server has two USB 3.0 ports which can be
connected to USB consoles on UPS supplies or Cisco devices. They
may also be used with external USB flash drives to update firmware and
configuration files.