Magnifying Aids TimeVision 835924 Quick Manual

Talking Cube Alarm Clock With LED Green Display Backlight
Product #835924
Buttons on clock and their functions:
Long Bar Button (SNOOZE/TALK/LIGHT) on the top and in the front part of the clock:
Announces the time and alarm time
Three round buttons immediately behind "Time Bar"
From Left to right:
Mode Set Hour Set Minute
Selector Switch directly behind three round buttons:
Adjusts Volume from low to high, to the left is high, right is low.
Instructions for Clock
To Set Time:
Press and hold the Mode button until the display is flashing and "Zz" appears at the top of the
display between the hours and minutes, press HOUR and MINUTE buttons to set time
To Set Alarm:
Press and hold the MODE button until the display is flashing and "Zz" appears at the top of the
display between the hours and minutes, then press MODE again and "AL" should appear on the
bottom of the display between the hours and minutes. Press the HOUR and MINUTE buttons to
set alarm time.
To Use Alarm:
Press the MODE button until "Zz" appears at the top of the display between the hours and
minutes, this means the alarm is turned-on. Press the MODE button until the "Zz" disappears.
The alarm is turned-off until you turn it on again.
To Stop Alarm:
Press any button (except SNOOZE / LIGHT / TALK) when the alarm is sounding, the alarm will
stop, and will again next day.