Table of Contents
Summary of Contents for Flight Display Systems FD600CAM-2
- Page 1 Document Number: Rev: Revision Date: 03/16/2011 MAN – FD600CAM-2/FD600CAM-2 Page 1 of 12 Ver 28V FD600CAM-2/FD600CAM-2 Ver 28V Installation and Operation Manual Glareshield Camera TECHNICAL SUPPORT 678-867-6717, or www.FlightDisplay.com...
- Page 2 Revision Date: 03/16/2011 MAN – FD600CAM-2/FD600CAM-2 Page 2 of 12 Ver 28V FD600CAM-2/FD600CAM-2 Ver 28V Glareshield Camera © 2008 Flight Display Systems. All Rights Reserved. Flight Display Systems 1765 Grassland Parkway Alpharetta, GA 30004 678-867-6717 Phone 678-867-6742 Fax sales@flightdisplay.com www.flightdisplay.com For the most current copy of all product manuals, please visit our website at www.flightdisplay.com...
-
Page 3: Table Of Contents
Document Number: Rev: Revision Date: 03/16/2011 MAN – FD600CAM-2/FD600CAM-2 Page 3 of 12 Ver 28V Table of Contents General Information ........................4 1. Front View ..........................4 2. Specifications ........................4 Installation Instructions ......................5 1. Power ..........................5 Wiring Suggestions ........................6 1. Composite Wiring ......................6 2. -
Page 4: General Information
Ver 28V General Information The FD600CAM-2 and the FD600CAM-2 Ver 28V are Glareshield Cameras. This small color camera, when mounted in the cockpit, will provide passengers with an opportunity to observe taxi, take-off, and landing, adding a whole new dimension to the In-Flight... -
Page 5: Installation Instructions
2/3 of the way up the video screen in the cabin. Power The FD600CAM-2 is a 12VDC camera that requires 90mA power and can operate at 9 - 15VDC. The FD600CAM-2 Ver 28V is a 28VDC camera that requires 45mA power and... -
Page 6: Wiring Suggestions
Document Number: Rev: Revision Date: 03/16/2011 MAN – FD600CAM-2/FD600CAM-2 Page 6 of 12 Ver 28V Wiring Suggestions All shields should be grounded to the connector at the source, and floating at the display. Avoid routing video wiring parallel to: • AC wiring •... -
Page 7: Power/Video
Document Number: Rev: Revision Date: 03/16/2011 MAN – FD600CAM-2/FD600CAM-2 Page 7 of 12 Ver 28V Power/Video Standard Density DB-9 Receptacle (supplied) Connector P/N: M24308/2-281 or Equivalent Crimp Contacts P/N: M39029/63-368 or Equivalent FD600CAM-2 FD600CAM-2 Ver 28V Description Description Number 12VDC Power... -
Page 8: Technical Drawing
Document Number: Rev: Revision Date: 03/16/2011 MAN – FD600CAM-2/FD600CAM-2 Page 8 of 12 Ver 28V Technical Drawing... -
Page 9: Troubleshooting
Document Number: Rev: Revision Date: 03/16/2011 MAN – FD600CAM-2/FD600CAM-2 Page 9 of 12 Ver 28V Troubleshooting Video Noise Check for an incorrect ground in the installation wiring. See specific examples of video noise below, or visit http://flightdisplay.com/Grounding.pdf VGA Shadowing Most of shadowing problems are due to shielding on the wire. Locate the point where all of the shields are connected. -
Page 10: Technical Support
For further product information, technical data and sample wiring diagrams, please click on the Dealers section of our web site at www.flightdisplay.com Instructions for Continued Airworthiness The FD600CAM-2 and the FD600CAM-2 Ver 28V is designed not to require regular general maintenance. -
Page 11: Warranty
If the return of the unit to the factory is required, an RMA number will be issued at that time. Flight Display Systems will, upon receipt of the failed hardware, remanufacture or replace the unit at our discretion. -
Page 12: Log Of Revisions
Log of Revisions Date Page Description 03/08/2007 Initial Release Updated camera lens specs, added operating temperature to 09/05/08 spec list 04/14/2009 Updated specifications, warranty info Added FD600CAM-2 Ver 28V, new Composite Wiring info, new 03/16/2011 Pinout info, new Technical Drawing...
Need help?
Do you have a question about the FD600CAM-2 and is the answer not in the manual?
Questions and answers