Transferring Call From Handsfree To Headset; Aux Input; Usb Charging Port - USA SPECS BT45-ACU Owner's Manual

Transferring an active call from Hands-free to

AUX Input

Aux 3.5 mm Audio Input
1. You'll need a 3.5mm to headphone jack cable (not included
in this package)
2. Make sure DIP switch #1 is set to ON
Note: Remember to manually adjust the volume of your audio
device to MAX after it's been connected.

USB Charging Port

Maximum charging ouput: 2.1 amps at 5 volt
(charging cable noto provided)
Handset
From radio: Press TUNE UP
button
From Steering wheel: Press
CH+ button
Press the same button again
to transfer the call back to the
Bluetooth Hands-Free mode.
Go to XM1 then press Preset 6
to access the audio device
connected to the AUX port.
13