Advertisement
Instructions:
1. Use included template to mark and drill 4 places ¼" (6.5 mm) diameter through holes in shelf.
2. Be sure shelf is securely fastened by using included angle brackets and screws, see important notes on
previous page and Diagram B below.
3. Attach Ironfix to shelf via through holes using included bolts.
4. Attach drop-down front, see below for suggestions.
HINGE AND
MOUNTING
PLATE
14"
To attach Drop-Down Front, Häfele recommends using Concealed Cup Hinges for adjustability.
Exact location of hinges, dimension of drop-down front, overlay, etc. – to be performed by trial and error.
• For a flat panel front, Hafele can suggest hinge item 329.17.507 and mounting plate Item 329.71.500.
• For raised panel fronts, Hafele can recommend a thin cup hinge item 329.28.500 and mounting plate item 329.71.500.
• For complete details, and other hinge options please see The Complete Hafele Catalog.
DROP-DOWN
FRONT
24"
3/4" THICK SHELF
3901 Cheyenne Drive
P.O. Box 4000
Archdale, NC 27263
1-800-423-3531
www.hafele.com
Diagram
B
SIDE PANEL
SIDE PANEL
DROP-DOWN
FRONT
6pcs. ANGLE
BRACKETS
SHELF
4 pcs. M6 BOLTS
Advertisement
