Table of Contents
Advertisement
Quick Links
unIFY Control Panel
unD3IO Configuration
QSC, LLC • 1675 MacArthur Boulevard • Costa Mesa, CA 92626
Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174
© 2020 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the
property of their respective owners. Patents may apply or be pending.
www.qsc.com
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for QSC Attero Tech unIFY
- Page 1 Ph: 800/854-4079 or 714/957-7100 • Fax: 714/754-6174 © 2020 QSC, LLC all rights reserved. QSC and the QSC logo are registered trademarks of QSC, LLC in the U.S. Patent and Trademark office and other countries. All other trademarks are the property of their respective owners.
- Page 2 Control Panel Attero Tech by QSC unD3IO Configuration The configuration software for the unD3IO is organized into the following key sections: • Inputs • Outputs *Note: Any changes made to device settings will only persist until power is cycled on the device. To retain the settings, they must be stored to Preset 0 using the Save Presets feature within unIFY Control Panel.
- Page 3 Control Panel Attero Tech by QSC unD3IO Configuration Input Select Control *Note: The unD3IO has two Dante™ transmit channels. The first is connected to the XLR input. The second is a mono sum of the selected stereo line level input(s).
Need help?
Do you have a question about the Attero Tech unIFY and is the answer not in the manual?
Questions and answers