Summary of Contents for Supertech Trailer Valet 5X
- Page 1 Operating Manual The most advanced trailer dolly on the planet More information https://www.caravansplus.com.au...
-
Page 2: Table Of Contents
WARNING injury to persons and property for which the manufac- turer cannot be held liable. Table of Contents SPECIFICATIONS ....................3 WHAT’S IN THE BOX.....................3 WARNINGS......................4 OVERVIEW......................5 ASSEMBLY......................6 INSTALLATION..................... 7 OPERATING INSTRUCTIONS ................8-10 WARRANTY......................10 MAINTANENCE....................11 More information https://www.caravansplus.com.au... -
Page 3: Specifications
Hitching and unhitching, leveling, and moving is now done with precision. The Trailer Valet 5X is designed for trailers up to 5,000 lbs. The Trailer Valet is for use only on paved surfaces or compacted gravel and soils that are free of debris. -
Page 4: Warnings
Warnings Always read and understand your drill/driver operator’s Before each use of the Trailer Valet, check for damaged parts. Carefully inspect the device for any part that appears to be damaged to determine if the device will device. Do not modify the device or use the device for operate properly. -
Page 5: Overview
Overview PART DIAGRAM: Drive Shaft Bearing Brake Engagement Lever Axle Yoke Assembly Axle Bearings ACME Jack Assembly Drive Wheel Jack Crank Follow Wheel Drive Handle Axle Gear Steering/Brake Handle Low Gear Chain Brake Cap Assembly High Gear Chain Left Bearing Housing Trailer Mount Bracket Right Bearing Housing Trailer Mount Clamp... -
Page 6: Assembly
Assembly More information https://www.caravansplus.com.au... -
Page 7: Installation
Installation WARNING WARNING The Trailer Valet is only to be installed The safest way to install the Trailer Valet WARNING WARNING is while the trailer is securely mounted to your on trailer tongues that are rectangular in profile. vehicle or mounted on an exis ng jack. Valet as it will rotate, allowing the trailer to drop. -
Page 8: Operating Instructions
Operating Instructions In this guide, you are shown the basic fundamentals Step 4: MOVE THE TOWING VEHICLE Once the hitch ball of the towing vehicle is detached from the trailer coupler and the Trailer Valet fully hoists the use of your Trailer Valet. Knowing the proper dollying trailer, move the towing vehicle away from the trailer. - Page 9 Operating Instructions Re-Hitching Your Trailer WARNING The drill can loosen and cause injury. Step 1: CONNECT YOUR TRAILER TO THE HITCH BALL If using a corded drill/driver, verify that the power the ground. on the Trailer Valet or moving vehicle will not damage Remove any wheel blocks below the trailer.
-
Page 10: Warranty
WARNING Warranty One-Year Warranty (”Warranty”). SuperTech S. Corp. (”We” or “Us”) warrants to the original consumer purchaser only (”You”) that the producctd will be free from material defects in both material and workmanship, ordinary wear and tear excepted, provided that installa on and use of the product is in accordance with product instruc ons. There are no other warran es, expressed or implied, including the warranty of merchantability or fitness for a par cular purpose. -
Page 11: Maintanence
Maintenance Before First Before Every 90 Check Each Use Days Read and understand your drill/driver operator’s Keep device free from contaminants. Use the cleaning towel provided to remove any dirt and debris. front cover of the device. The Trailer Valet is made of high strength steel and given a powder coat finish made to resist corrosion. However, if the device is used in a marine environment or where road salt is encountered, rinse off... - Page 12 SUPERTECH S. CORP. 2368 Peck Road Industry, CA 90601 Customer Service: 1-626-400-6299 Email: support@trailervalet.com or visit: www.TrailerValet.com More information https://www.caravansplus.com.au...
Need help?
Do you have a question about the Trailer Valet 5X and is the answer not in the manual?
Questions and answers