Blaupunkt Frida Owner's Manual page 40

Error codes computer model 2
Brake error, please check brakes/ brake wiring. Remove battery for 10 minutes
and try again. If no success, call service.
Motor error, please remove battery for 10 minutes and try again. If no success,
call service.
Controller error, please remove battery for 10 minutes and try again. If no
success, call service.
Indicates that throttle mode is not working or is disabled.
Note: Throttlemode is not permitted in Germany and other European
countries, it is therefore deactivated. Activation is not possible with this model
(depending on the version, the symbol is permanently on or off, both states
DO NOT indicate an error)
TORQUE
Please note the information on the bike components themselves, some parts have the
max. permissible Torques printed on.
For other parts we have put together a list as a guide. Please always tighten the screws
with the necessary feeling, if you are not sure, have the screws checked by a specialist.
The smaller a screw is, the more likely it is to be damaged by excessive forces.
• Cover cap on tube claw = 3-4 Nm
• Brake lever on the handlebar = 3 Nm
• Brake caliper = 6 Nm
• Brake disc = 2-4 Nm
• Brake shoe = 6-8 Nm
• V-brake = 5-9 Nm
• Cableclamp = 5-7 Nm
• Cranks = 34-42 Nm
• impellers with axle nut = 15 to 20 Nm,
• Pedals 28-34 Nm
• Handlebar clamp = 7-9 Nm
• Seat post at saddle (one M8 bolt) = 17 Nm
• Seat post at saddle (2 screws) = 6-8 Nm