Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for ITEM Drawbar D Series
- Page 1 Drawbar D25-686, Self-Lifting Drawbar D25-610 User guide...
-
Page 2: Table Of Contents
Contents 1. General safety information 1. General safety information 1.1 Correct use 1.2 Improper use 1.3 Personnel qualifications 1.4 Warning symbols 1.5 CE declaration 2. Product description, use and accessories 2.1 Drawbar D25-686, Self-Lifting 2.2 Drawbar D25-610 3. Operating data 4. -
Page 3: General Safety Information
• Use only item products that are in perfect working order. • Check the product for obvious defects. • Use the product only within the performance range described in the techni- cal data. -
Page 4: Correct Use
1.1 Correct use The Drawbar must only be used in accordance with the technical data and safety requirements set out in this document. The Drawbar is a technical item of work equipment and is not intended for private use. Significant modifications to the Drawbar shall result in an exclusion of liability on the part of item GmbH and must be added and factored into new documentation. -
Page 5: Ce Declaration
1.5 CE declaration... -
Page 6: Product Description, Use And Accessories
2. Product description, use and accessories 2.1 Drawbar D25-686, Self-Lifting Drawbar D25-686, Self-Lifting is an especially ergonomic and back-friendly When using Drawbar D25-686, Self-Lifting, the pin of the Coupling (0.0.661.87) solution for linking transport trolleys together or can form a connection with a should point down. -
Page 7: Drawbar D25-610
∅74 ∅35 ∅25 Drawbar D25-686, Self-Lifting Rated tensile force in continuous operation: F= 6000 N Rated trailer load in continuous operation: 6 t 2.2 Drawbar D25-610 Thanks to its low dead weight, Drawbar D25-610 is ideal for transport trolleys The compatible Drawbar Coupling D25-30 (0.0.674.28) completes the system and tugger trains that are also light in weight. -
Page 8: Operating Data
• The Drawbars are fundamentally suitable for use in dry, vibration-free environments where temperatures range from -20 °C to +70 °C. If they are to be used for applications outside these limits, item GmbH must be consulted. Travel speed [km/h]... -
Page 9: Commissioning And Operation
3.1 Explanation of operating data and example configuration Refer to DIN 15172 when calculating the trailer load of industrial truck tugger trains. VDI 3973 builds on this DIN standard to offer practical calculations for maxi- mum trailer load under operating conditions and set out parameters that need to be factored in when determining the maximum length of tugger trains. If there are any uncertainties regarding the conditions of the routes to be used or likely peak loads, test runs should be carried out and documented in line with VDI 3973 and DIN 15172. - Page 10 • When using the self-lifting Drawbar variant, the pin of the Coupling must point downwards. • After installing the Drawbar, carry out a test run somewhere that is free from hazards but outside the area where the product will be used. •...
-
Page 11: Maintenance And Inspection
• Brakes must be applied when parking the tugger train. • Tugger train operation is only permissible when using the original item Coupling and Drawbar. • If an emergency braking manoeuvre is carried out or a collision occurs when pulling the trolleys, all the Couplings, Drawbars and fixings must be checked for damage. -
Page 12: Product Development And Documentation
You can find the latest version of these operating and the product you have acquired. item Industrietechnik GmbH can also not instructions at item24.com. item Industrietechnik GmbH...
Need help?
Do you have a question about the Drawbar D Series and is the answer not in the manual?
Questions and answers