BullTronics MIB IV User Manual page 25

Help - Frequently Asked Questions
Is the Bluetooth connection of the mobile phone and the Bluetooth
1.
connection of the car not connected?
If the Bluetooth connection is not available, you can turn off the
Bluetooth of the mobile phone first, then open it and search again before
connecting. If it doesn't work, you can click the reset of the Bluetooth
setting, and then connect it after a few seconds.
Bluetooth music has no sound?
2.
Make sure the paired phone has a volume
output.
Phone book click to download does not respond?
3.
After the Bluetooth connection, after the phone book is clicked and
downloaded, the mobile phone will receive a request to download the
contact, confirm and allow the download request to be downloaded.
Is there no update after the Bluetooth name is set?
4.
After the Bluetooth name is set, if it is not updated immediately,
please disconnect Bluetooth and click the pairing connection.
Is there no data update for the music player plugged into the SD card
5.
or USB?
After the user plugs in the storage device, the music player will detect
and scan the data. If the stored data is relatively large, it may take a little
time to update (a few seconds - 1 minute). If it is still not updated, please
ensure that the storage device is hung. Load it (check the file browser to
see if there is a corresponding storage directory, if there is no directory,
please re-plug the card, or check the hardware).
Song file name shows garbled?
6.
The song name does not display the file name. If the encoding method
of the song itself is neither a common format nor a coding method
conforming to the native language, an error in the encoding display may
occur.