Page 3
System Description BlueFon comfort Limited Warranty and Warranty Claims BlueCom AG warrants each new product manufactured and sold by it to be free from defects in material, workmanship and construction, except for batteries, fuses, or other material normally consumed in operation which may be contained therein, for a period of one year after shipment to the original purchaser (which period is referred to as the “warranty period”).
1 Introduction The BLUEFON COMFORT telephone set – is a custom-made analogue telephone set for BLUECOM ECS-FD/IP PABX systems. It allows to use all the basic voice services of the BLUECOM communication systems and provides a telephone book and call logs.
System Description BlueFon comfort 4 Declaration of Conformity BlueCom declares that the product BLUEFON COMFORT is conform to the EC directive 1999/05/EC of the European Parliament and the European Commission dated 9th of March 1999 for radio equipment and for telecommunications terminal equipment and the reciprocal recognition of their conformity.
System Description BlueFon comfort 6 Description of BlueFon Comfort Telephone Set HANDSET MICROPHONE COIL CORD HOOK SWITCH HANDSET GUIDE DISPLAY LCD MESSAGE LED MEMORY 10. MUTE 11. VOLUME 12. UP 13. OK 14. PHONE BOOK 15. DOWN 16. C (Cancel) 17.
System Description BlueFon comfort Installation 7.1 Telephone Installation Connect one end of handset coil cord to the handset base and the other end to the base unit at (27). Connect one end of the telephone line cord to the base unit at (26), and the other end to the wall outlet.
System Description BlueFon comfort 7.2 Battery Installation This telephone requires 4 batteries LR6 (AA) 1.5V as a back-up power source. Open the battery cover with a screw driver and place the batteries into the battery compartment. Make sure the batteries are placed properly and with the correct polarity, printed on the bottom of the batteries compartment.
System Description BlueFon comfort Main Features 8.1 Phone Settings At the on-hook or off-hook state, press OK key to go to the setting mode, the LCD will display: VIEW MENU ↑↓. Use UP or DOWN keys to select a menu item. To change an entry item press the OK key.
System Description BlueFon comfort 8.1.8 Edit Phone Book Record When the LCD displays: PHONEBOOK EDIT , press OK key once and enter the first character of name, you can view the corresponding telephone numbers by pressing OK key. If you do not enter any characters and press OK key, then the first entry will be shown. Use UP or DOWN key to select the record that you want to edit.
8.3.3 Dial F1, F2, F3 and F4 Keys Pick up the handset or press SPEAKER / key, and then press F1 to F4 key to dial out the specific number programmed by BlueCom PABX systems. 8.3.4 Dial Two-touch Memory Pick up the handset or press SPEAKER / key and press MEM key and N (N=1 ~ 9, 0, * or e0f23b3cdff9ea8309199dc94bdcd195, Rev.
System Description BlueFon comfort 8.3.5 Call Time The display shows the duration of a call in progress after the number has been dialled. 8.3.6 Pause Key Press PAUSE key to insert a delay time of 3.6 seconds in a dialling sequence.
System Description BlueFon comfort 8.4 Speaker Phone Operation 8.4.1 Speaker Phone Mode To make a call, press SPEAKER key to activate the speaker phone. Press SPEAKER key to deactivate the speaker phone and to terminate the call. 8.4.2 Speaker Volume Control To change the speaker volume, press VOL key to adjust the volume levels during off-hook state.
Need help?
Do you have a question about the BlueFon Comfort and is the answer not in the manual?
Questions and answers