Advertisement
Quick Links
THE
INPRINT-MICRO
INSTRUCTION
MANUAL
(10/13/11) PATENT PENDING
INSTRUCTIONAL VIDEOS AVAILABLE AT:
video.inprintsecurity.com
9g Products, Inc.
222 Oak Street
Bonner Springs, KS 66012
www.inprintsecurity.com
CONTENTS:
Introduction
What is Biometric Technology?
Features
Specifications
Important Information
Technical Support
Getting Started
Installing Battery
Administration
Installing A/C Adapter
Enrolling Fingerprints
Safety
Light Indications
Troubleshooting
Back-up Keys
Cleaning
Optional Accessories
Accessory Instructions
Limited Warranty
1
GEN
3.0
TECHNOLOGY
TM
Advertisement
Subscribe to Our Youtube Channel
Summary of Contents for 9g Products INPRINT-MICRO
- Page 1 Features Specifications Important Information Technical Support Getting Started Installing Battery Administration Installing A/C Adapter Enrolling Fingerprints Safety Light Indications Troubleshooting Back-up Keys 9g Products, Inc. Cleaning 222 Oak Street Optional Accessories Bonner Springs, KS 66012 Accessory Instructions Limited Warranty www.inprintsecurity.com...
- Page 2 INPRINT-MICRO. Also, to better serve you in the future, please complete and return the Warranty Registration Card included to properly register your new INPRINT-MICRO.
- Page 3 NEITHER SELLER NOR MANUFACTURER SHALL BE LIABLE FOR ANY INJURY, LOSS OR DAMAGE, DIRECT OR CONSEQUENTIAL, ARISING OUT OF THE USE OF, OR THE INABILITY TO USE, THE INPRINT-MICRO. THE USER SHALL DETERMINE THE SUITABILITY OF THE INPRINT- MICRO BEFORE THE INTENDED USE AND USER ASSUMES ALL RISK AND LIABILITY WHATSOEVER IN CONNECTION THEREWITH.
- Page 4 NOT STORE THE KEYS IN THE SAFE. Store your keys in another secure location. INSTALLING BATTERY AND A/C ADAPTER. The INPRINT-MICRO is powered by one 9 volt battery (not included) and/or an optional A/C adapter (not included). You may use one of these power supplies or both at the same time.
- Page 5 1) Press and hold to clear all memory 2) Press and release to initiate enrollment process To clear the INPRINT-MICRO of all stored fingerprints, locate the Administration Button. Press and hold the button firmly until the RED, YELLOW fig .3 and GREEN lights rapidly flash together.
- Page 6 Start with the first joint of the finger and using an even, moderate speed pull the finger across the sensor. The INPRINT-MICRO will ask you to swipe the same finger at least five times in order to successfully enroll. If a RED light comes on during the process it indicates the previous scan was not successful.
- Page 7 INPRINT-MICRO needs you to enrolled and slide as shown Ref Fig. 6 reswipe your finger. The INPRINT-MICRO will scan the finger Red Continuous Slow and compare it to stored fingerprints. Flashing: When a match occurs the door will open quickly.
- Page 8 If the INPRINT-MICRO becomes inoperable, you will need to use your keys to open the door. To access the contents of the INPRINT-MICRO using the key, pull back the lock cover which will give you access to the lock. Insert the key into the lock and turn to release the door catch which will open the front door.
- Page 9 OPTIONAL ACCESSORIES A/C Adapter When powered by our A/C adapter the INPRINT-MICRO is constantly at the ready. The constant power means the device can bypass the 1 second wake up process and open nearly instantly. Tie-Down Cable For maintaining security in multiple locations you can purchase an extra Tie-Down Cable.
- Page 10 Instructions for the use and installation of the A/C Adapter can be found on page 9 of this guide. Tie-Down Cable Insert cable into slot and wrap end with loop around fixed object to secure INPRINT-MICRO. INSTRUCTIONAL VIDEOS AVAILABLE AT: video.inprintsecurity.com...
- Page 11 If it is determined your 9G PRODUCTS, INC. IS INPRINT-MICRO needs to be COMMITTED TO PROVIDING returned, a Customer Service PRODUCTS OF HIGH QUALITY Representative will provide a AND VALUE AND MAKES Return Authorization Number. EVERY EFFORT TO ENSURE Please have the following...
- Page 12 ADDITIONAL & UPDATED INFORMATION CAN BE FOUND AT: www.inprintsecurity.com ATTENTION! DO NOT RETURN TO RETAILER! If you have problems or questions regarding your INPRINT-MICRO Please call or email (913)422-7400 info@9gProducts.com...
Need help?
Do you have a question about the INPRINT-MICRO and is the answer not in the manual?
Questions and answers