Advertisement
ICheq Non-contact Infrared Thermometer
1 Product Description
This product is a Non-contact Infrared Thermometer, a professional human body
temperature measurement and surface temperature measurement instrument. It
can be used to measure the temperature of human body and baby bottles, rice
paste, bath water temperature, room temperature etc. The use of advanced
infrared temperature measurement technology can quickly measure the target
temperature, and intelligent analysis and processing, display the measurement
result in 1 second.
This device must only be used for the purposes described in this instruction
manual.
Note: According to the parts of the body, difference of human skin and difference
in tests, the measured temperature will be different. This is normal. The influence
of parts of the body more exposed by environment temperature, the greater the
influence on the accuracy of the temperature.
2 Advice for First Time Usage
In order to ensure the normal use of non-contact infrared thermometer, please
make sure the batteries are installed in the correct positive and negative pole
directions, before using the instrument. If the batteries are installed in wrong
direction, the instrument may get damaged and will influence the test precision
and make the product not usable.
3 Attention
• Please make sure to remove the hair on the forehead, before measuring, and
wipe the sweat.
• This product use environment temperature is 0℃ ~ 50℃, the optimal
temperature of 25℃, please do not use this product in higher than 50℃ or
lower 0℃ in the environment.
• When using at a location with different ambient temperature, in order to get
the measurement data accurate and reliable, keep the thermometer in the
new usage environmental for 15 - 20 minutes before making measurements.
• For the measurement of human body temperature, please select "Body"
mode, measure the surface temperature of human body. For surface
temperature of objects select "surface" mode. Please confirm that the
distance is measured in the range of 3 to 5 cm.
• In view of the influence of many factors on measurement accuracy, this
1
Advertisement
Table of Contents
Summary of Contents for Agappe ICheq
- Page 1 ICheq Non-contact Infrared Thermometer 1 Product Description This product is a Non-contact Infrared Thermometer, a professional human body temperature measurement and surface temperature measurement instrument. It can be used to measure the temperature of human body and baby bottles, rice paste, bath water temperature, room temperature etc.
-
Page 2: Product Features
product cannot replace the doctor's diagnosis, screening. If readings are found abnormal, please timely check medical treatment. 4 Product Features The use of a machine includes composite function, • Human body mode: 32℃ ~ 43 ℃ and Surface mode: 0-100℃ •... - Page 3 5.1 Display Parameters 6 Operations 6.1 Installing Batteries...
- Page 4 Please install batteries carefully according to the pole indicated on the thermometer and on the batteries. • First use or when installing a new battery, wait for 10 minutes for warm-up before talking measurements. • If the thermometer is not in use for a long time, the first start will detect ambient temperature, and the startup time extended to 2 seconds.
-
Page 5: Battery Replacement
• F4: Clear the data for memory Press SET button 3 times, screen displays F4, then click Power-ON/OFF key to clean the memory data. • F5: Temperature compensation; this function is for manufacturer use only. • F6: Alarm temperature setting; Press SET button 5 times, screen displays F6, then click Power-ON/OFF key to set the temperature value between 37℃... - Page 6 to measure temperature lower than 32℃, or surface mode to measure temperature lower than 0 ℃. 3. Reasons for the message "HI" and "LO" are the following: Reasons for information display “HI” or SUGGESTIONS “LO” Temperature value is influenced by hair, obstacles occlusion ensures...
Need help?
Do you have a question about the ICheq and is the answer not in the manual?
Questions and answers