Table of Contents
Advertisement
DIP switch 3
Number
Setting
[1], [3], [4] System
[2]
Frame buffer setting
[5]
3D Video Settings
Network redundancy
[6]
setting
[7] - [8]
System
Description
Always set to OFF.
OFF: Disable the frame buffer on the sender side.
ON: Reduce the distortion that occurs immediately after video
input starts using the frame buffer function on the sender side.
When this is set to ON, transmission delay will increase by up to
40 milliseconds. Before using the unit in a medical procedure, be
sure to verify operations using the configurations and
transmission delays anticipated for the procedure. Do not use
the unit if doing so will hinder the medical procedure.
OFF: During 3G Quad SQ input, the line-by-line format is
detected automatically and converted to top-and-bottom before
transmitting and output.
ON: When line-by-line auto-detection does not function during
3G Quad SQ input, conversion from line-by-line to top-and-
bottom is forced before transmitting and output.
OFF: Disable network redundancy.
ON: Enable network redundancy.
Always set to OFF.
32
(: Necessary; –: Not necessary)
Sender
Receiver
–
–
–
–
–
–
Advertisement
Table of Contents
