Moree LOUNGE LED PRO 04-08-01 Instruction Manual

Construction Diagram

PLEASE REMOVE THE PROTECTIVE PLASTIC FILM!
Ensure that the product is disconnected from the main supply.
The place of assembly must be dust free and dry. Place the up-
per housing with the top on the ground. Please place the table
on a soft surface in order to avoid scratching. Place the lower
housing on top of the upper housing. Assemble the lower hous-
ing and upper housing with the four provided screws. Make sure
that all screws are fixed firmly. The table can now be carefully
turned over.
Upper housing
LED Light source
Lower housing

Remote Control

[1] Single Press [2] Double Press
[1] White light
[2] Warm white light
[1] Colour selection cycle
(Blue-Magenta)
[2] 3 minute RGB colour change
programme
[1] Colour selection cycle
(Green-Cyan)
[2] Pulse programme
[1] Colour selection cycle
(Red-Yellow)
[2] 90 second RGB colour change
programme
Colour selection button; can be used
at any time to choose the colour
being displayed.
To activate the previous programme
or choose other programmes please
push the off/ reset button.
Off/ reset-button
Before use remove the battery's protective sheet.
Note: Colours printed on the remote may differ from those
displayed by the LED unit.
Cable Guide
Glass Table Top (04-01-01)
A glass table top is available as an accessory.

Disposal/ Ecology

Packaging material and appliance are made from recyclable
materials. Seperation of the remaining waste materials into
different types facilitates the recycling of valuable raw materi-
als. When the appliance is to be no longer used please dispose
of the appliance in the proper manner.
This Symbol on the product indicates that it should not be
disposed in the normal houshold waste. Please take it to
a recycling point for electrical and electronic appliances
to be recycled in a proper manner.
Also rechargeable batteries which are dead or defective should
not be disposed of in the household rubbish; always take them
to a special waste disposal and make an important contribution
to protecting our environment.
Please obtain information on disposal from your local
authority.

Warranty

The vendor provides warranty for perfect material and error free
manufacturing for 12 months, starting from the day of purchase
on the following conditions:
The warranty is void with interference by the customer or through
a third party. Damage caused by inappropriate treatment,
natural causes or causes beyond control do not fall under the
warranty. In response to complaints, we will replace/repair
defect parts or the whole product. Replaced parts will be
retained. No further claims exist due to the warranty. The
warranty claim needs to be proven with the purchase receipt by
the customer.
IN THE CASE OF WARRANTY THE PRODUCT CAN ONLY BE RE-
TURNED AND ACCEPTED PROVIDING THAT IT IS IN ITS ORIGI-
NAL (INTACT) PACKAGING.

Distribution

www.moree.de
Moree Ltd.
Kaiserswerther Markt 11
40489 Düsseldorf
Germany
Designed in Germany © 2009 - Products are subject to change.
LOUNGE LED PRO
Bedienungsanleitung/ Instruction Manual
Mod. Lounge LED Pro 04-08-01
•
Die Bedienungsanleitung vor dem ersten Gebrauch vollständig lesen und sorgfältig aufbewahren.
•
Please read the instruction manual fully, before using the product. Keep the manual for the entire
life of the product.
• Inklusive Fernbedienung
• Inclusive Remote Control
LED