Xterasys Wireless LAN Card User Manual page 31

Key size
CCX Configuration
Network Security
Type
LEAP User
Network administers have been taking advantage of the simplified user and
security administration that LEAP provides.
Before the security authentication is started, you should enter the user
key setting from the radio button.
Encryption：This setting is the configuration key
used in accessing the wireless network via WEP
encryption.
A key of 10 hexadecimal characters (0-9, A-F) is
required if a 64-bit Key Length was selected.
A key of 26 hexadecimal characters (0-9, A-F) is
required if a 128-bit Key Length was selected.
A key of 58 hexadecimal characters (0-9, A-F) is
required if a 256-bit Key Length was selected.
40 Bit, 128 Bit or 256 Bit.
None – Choosing it will enable the WEP Select
button. As described in Page 26.
LEAP – Choosing it will enable the LEAP
security.
External – Select this item to use the external CCX
configuration utility.
-
27 -