Smart, optimized storage Console Module Counter Module Angled pole storage Header Module Some frames are connected during shipping Standard Module Standard Module To disconnect the frames, refer to the corresponding modules (see table of contents)
Module Color-Coding and Chronology (Example) tart 1. Find the «Start Here» arrow on your booth rendering 2. Locate frames in the crate using the Look at module numbering system colors on your booth rendering 3. Look at the frame’ s color and refer to the 4.
Closet Module Attach the door Connect the Position shelves Snap profile covers into place frames See storage accessories (p31) Open door Lock door for transport...
Storage Module (1m ) and Closet Attach the door Connect the frames Snap profile covers into place See storage accessories (p31) Open door Lock door for transport...
Storage Module (2m Attach the door Connect the frames Snap profile covers into place See storage accessories (p31) Open door Lock door for transport...
Multimedia Module - Touchpad Rotate feet Attach cable to frame and feed Insert shelf through the graphic...
Page 18
Multimedia Module - Touchpad Fasten tablet holder Fasten tablet holder to shelf Adjust the angle to tablet Lock the padlocks Support the shelf 1. The pre-set combination is 0-0-0. 2. Push the button A in the direction of the arrow. Hold it until completing the next step.
Signage Module Connect the attachment bar 480x1200 mm 1200x480 mm 480x480 mm vertical rectangle horizontal rectangle square Different attachment positions Attach to frame For the backlit version, refer to page 33...
Counter Module Connect at an angle Position shelf Snap profile covers into place With door Attach door Snap profile covers into place Place countertop Door...
Connection module Double straight counter Double corner counter Connect the two counters Connect at an angle Connect the counters to the connection module Place the countertop Place the countertop Adjust and secure the countertop turn turn Adjust and secure the countertop Lock Lock...
Finishing Touches Single-sided feet Profile covers Snap Open and Closed position Free-standing locked for transport position position Click Double-sided feet Click...
Finishing Touches Shelves Universal attachment piece Locate pierced areas Identify Fix your object on the universal attachment piece on graphics Screw it to the object… Or stick it 2 kg 5 cm 1,5 kg 1 kg Insert 10 cm 5 cm 1 kg 500 g 15 cm...
Finishing Touches Brochure holder Hanging rod Locate pierced areas Identify Insert on graphics hanging rod Insert Hang Hangers included Header position...
Page 32
Finishing Touches Free-standing shelves LED light Assemble...
Page 33
Finishing Touches Signature LED spotlight The external flexible cable or cord of this luminaire cannot be replaced; if the cord is damaged, the luminaire shall be destroyed. The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified person.
Graphics Multi-panel option For: changing graphics rear graphics or multi-panel options Silicone edge insertion orientation Ensure that your frames are connected and the extremities are free Graphic orientation Finish with small Position Insert silicone Repeat at the pushes corners edges in center of the center each...
Page 36
Demand the original Panoramic is a patented solution available in 35 countries worldwide. Only Panoramic graphics can guarantee adherence to your country’s fire-retardant standards. They are designed to block light perfectly and to provide an unparalleled colour rendering.