Bluetooth Operation; Led Light Control - Latte SoundMagic Express User Manual

7. Bluetooth Operation


Turn on the product and move the Bluetooth device within 10 ft

Go to "Setting" on your smart phone or Bluetooth device and activate the
"Bluetooth" function (Setting>Bluetooth). Scan for available Bluetooth
devices nearby.

When "SoundMagic Express" appears on the available Bluetooth device
list, select "SoundMagic Express" to establish connection (if asked for a
passcode, enter "0000"). When the connection is successfully
established, it produces a connection tone.

During the music play, the music play will stop when you receive a call.
You can do one of the following.
 Answer the call: Press
 End the call: Press
will resume automatically
 Reject the call: Press
call
Note:
o
When the number of the previously paired devices with the speaker exceeds
the maximum capacity (4 units), the speaker will automatically clear the first
device paired in its memory.
O
When the speaker is currently connected to a Bluetooth device and you want
to pair a different Bluetooth device, please disconnect the currently paired
device before you attempt to pair a new device.

8. LED Light Control

There are 8 LED light modes including 2 equalizer modes. After the product
is turned on, press the light button
At the end of the 8th LED mode, the light will turn off. Pressing the light
button again will restart the cycle.
button shortly to answer the call
button shortly to end the call. The music
button for about 3 seconds to reject the
to switch between different light modes.