Bits Limited SMART STRIP SCG-3MVR User Manual

COMPATIBILITY

The 5 Generation Smart Strip works with the following devices in the
th ®
CONTROL OUTLET:
Most computers & home entertainment equipment.
•
Light-duty workshop equipment.
•
15 Watt or greater incandescent lamps.
•
5 Watt or greater fluorescent lamps.
•
IMPORTANT NOTES:
The adjustment dial is a ½ turn dial; do not force it.
•
Some computers can take 2-3 minutes before they sleep or hibernate and this
•
may affect how you calibrate your Smart Strip
When the computer does go into sleep/hibernate, everything plugged into the
•
SWITCHED OUTLETS should also turn off.
Notebook computers can go into sleep mode while the battery is still charging.
•
Devices plugged into the switched outlets may NOT turn off until the charging
cycle is complete.
Risk of electric shock. Do not plug into another relocatable power tap.
•
If you have any questions please visit our web site first since we have an extensive
knowledge base which will most likely answer your question.
700 N Valley St., Suite B-#41123
Anaheim, CA 92801
631.261.8764
www.bitsltd.net
© 2016 BITS Smart Strip, LLC
Smart Strip is a registered trademark of BITS Smart Strip, LLC
®
.
®
User Guide
Model - SCG-3MVR