VAT Videofied IMV702 Product Installation Sheet

Product Summary

The MotionViewer IMV 702 is a wireless, indoor motion activated
camera designed for use in a Videofied security system. The
camera includes the following features:
Lithium batteries for long life
>
Color Day / B&W night
>
Wide angle lens
>
Infrared LEDs for night illumination
>
Standard motion coverage lens (30 ft./9 m distance)
>
Dual tamper function provides detection of both wall and cover
>
tamper.
Transmits check-in/status signal every 8 minutes
>

Installation Guidelines

For an easier installation, programming and RF testing should be
done to check for good communication between the control panel
and all system devices before mounting.
Install the detector and other system devices in the following order:
Programming / RF Testing: Program detector and all other devices
>
into the control panel and test RF communication at each intended
device location to the control panel.
Mounting: Mount detector at the tested location.
>

Mounting Rules

>
Use proper tools and hardware.
>
Mount indoors in a temperature controlled environment.
>
Mount camera 2.0 to 2.3 m (6.6 to 7.5 ft.) from the floor.
>
Respect Top and Bottom side of the Motion Viewer
>
When possible, mount in a wall corner in order to aim at a complete
room
>
Mount detector on an outside wall, aimed at area to protect.
>
Do not aim detector at windows, especially those that let in direct
sunlight, or at heat sources such as lamps, fireplaces, radiators, and
heating vents.
>
Do not aim detector at moving objects such as curtains, fans or
animals.
>
Do not cover the Fresnel lens
P R O D U C T I N S T A L L A T I O N
www.videoalarmtechnologies.com.au
Indoor Motion Viewer IMV702
Flat Wall
Mounting
Holes
Corner
Mounting
Holes
S H E E T
Doc. - Ref. 5212-IMV